Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. 3DXtech
  3. CarbonX™ Carbon Fiber ASA 3D Printing Filament

CarbonX™ Carbon Fiber ASA 3D Printing Filament

CarbonX™ Carbon Fiber ASA 3D Printing Filament
1 / 1 PageView full catalog

CarbonX™ Carbon Fiber ASA 3D Printing Filament

Product catalog summary
Physical Properties:
Density is measured at 1.11 g/cc according to ISO 1183 standards.
Mechanical Properties:
  • Tensile Strength at Break: 48 MPa (ISO 527)
  • Tensile Modulus: 5355 MPa (ISO 527)
  • Tensile Elongation at Break: 3% (ISO 527)
  • Flexural Strength: 78 MPa (ISO 178)
  • Flexural Modulus: 5210 MPa (ISO 178)
Thermal Properties:
  • Glass Transition Temperature (Tg): 105°C (DSC)
  • Deflection Temperature at 0.45 MPa: 97°C (ISO 75)
Electrical Property:
Surface Resistance is greater than 109 Ohm/sq as per ASTM D257.
Printing Specifications:
  • Printer Type: Open Source FDM/FFF
  • Nozzle Size: 0.4mm
  • Layer Height: 0.25mm
  • Infill: 100%, +/- 45°
  • Extrusion Temperature: 250°C
  • Bed Temperature: 110°C
  • Specimen Orientation: XY Flat
Disclaimer:
The technical data is provided without charge or obligation and should not be used to establish specification limits or as the sole basis for design. It is not a substitute for testing to determine fitness for specific use.
See more

Catalog excerpts

CarbonX™ Carbon Fiber ASA 3D Printing Filament-1

TDS Rev 1.0 Technical Data Sheet: CarbonX™ Carbon Fiber ASA 3D Printing Filament Physical Properties Density Mechanical Properties Tensile Strength, Break Tensile Modulus Tensile Elongation, Break Flexural Strength Flexural Modulus Thermal Properties Glass Transition Temperature (Tg) Deflection Temperature at 0.45 MPa (66psi) Typical Value Unit Ohm/sq Electrical Property Surface Resistance Printed Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 250°C Bed Temp: 110°C Specimen Orientation: XY Flat Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient’s sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specifi

 Open the catalog to page 1

All 3DXtech catalogs and technical brochures

  1. CF20_PEEK
    CF20_PEEK

    1  Page

  2. BioGuard_PLA
    BioGuard_PLA

    1  Page

  3. ezPC
    ezPC

    1  Page

  4. PEI_GF30
    PEI_GF30

    1  Page

  5. CF15_PEKK-A
    CF15_PEKK-A

    1  Page

  6. CarbonX™ Carbon Fiber Reinforced PETG 3D Filament
    CarbonX™ Carbon Fiber Reinforced PETG 3D Filament

    1  Page

  7. CarbonX™ Carbon Fiber Reinforced Nylon 3D Filament
    CarbonX™ Carbon Fiber Reinforced Nylon 3D Filament

    1  Page

  8. 3DXSTAT™ ESD-Safe ABS 3D Filament
    3DXSTAT™ ESD-Safe ABS 3D Filament

    1  Page

  9. 3DXSTAT™ ESD-Safe PETG 3D Filament
    3DXSTAT™ ESD-Safe PETG 3D Filament

    1  Page

  10. 3DXSTAT™ ESD-Safe PC 3D Filament
    3DXSTAT™ ESD-Safe PC 3D Filament

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.