Technology... Advanced. Technical Data Sheet Rev 2.1 3DXSTAT™ ESD-Safe PETG 3D Filament 3DXSTAT™ ESD-Safe PETG [polyethylene terephthalate glycol copolymer] is a high-performance 3D printing filament formulated utilizing state-of-the-art conductive additives and premium PETG. This filament is ideal for applications that require consistent and reliable electrostatic dissipation [ESD] protection. 3DXSTAT™ ESD-Safe PETG is an amorphous polymer that offers excellent dimensional stability and enhanced chemical resistance. Suitable for use in practically all consumer-grade FDM/FFF printers. Made by 3DXTECH® in the USA. General Property Unit Standard Typical Value The reported technical data was generated from printed ISO test specimen. The general print parameters utilized are noted below. • Desktop FDM/FFF Printer • Nozzle: 0.4mm A2 hardened • Layer height: 0.2mm • Infill: 100%, +/-45° • Extrusion temp: 250°C • Bed temp: 65°C • Bed prep: Hairspray on glass • Print speed: 50 mm/sec Mechanical Property Unit Standard Typical Value Tensile Strength MPa ISO 527 46 Tensile Modulus MPa ISO 527 1794 Tensile Elongation, Break % ISO 527 13.5 Flexural Modulus MPa ISO 178 1779 Flexural Strength MPa ISO 178 74 Thermal Property Unit Standard Typical Value Glass Transition Temperature [Tg] Heat Distortion Temperature [HDT] @ °C ISO 75 77 Electrical Property Unit Standard Typical Value Surface Resistivity Ohm/sq IEC 60093 > 106- 109 < Printing Recommendation Typical Range Extruder Temperature Print Speed WWW.3DXTECH.COM 571 Gordon Industrial Court, Suite E Byron Center, Ml 4931 5 U