Technology... Advanced. Technical Data Sheet Rev 2.1 3DXSTAT™ ESD-Safe PC 3D Filament 3DXSTAT™ ESD-Safe PC [polycarbonate] is a high-performance 3D printing filament formulated utilizing state-of-the-art conductive additives and premium PC. This filament is ideal for applications that require consistent and reliable electrostatic dissipation [ESD] protection. 3DXSTA"TM ESD-Safe PC is an high-temperature amorphous polymer that offers excellent dimensional stability and high thermal properties with a Tg of 143°C. Suitable for use in practically all consumer-grade FDM/FFF printers. Made by 3DXTECH® in the USA. General Property Unit Standard Typical Value The reported technical data was generated from printed ISO test specimen. The general print parameters utilized are noted below. • Desktop FDM/FFF Printer • Nozzle: 0.4mm A2 hardened • Layer height: 0.2mm • Infill: 100%, +/-45° • Extrusion temp: 290°C • Bed temp: 1 20°C • Bed prep: PEI Sheet • Print speed: 50 mm/sec Mechanical Property Unit Standard Typical Value Tensile Strength MPa ISO 527 68 Tensile Modulus MPa ISO 527 2300 Tensile Elongation, Break % ISO 527 6 Flexural Modulus MPa ISO 178 2410 Flexural Strength MPa ISO 178 95 Thermal Property Unit Standard Typical Value Glass Transition Temperature [Tg] Heat Distortion Temperature [HDT] @ °C ISO 75 135 Electrical Property Unit Standard Typical Value Surface Resistivity Ohm/sq IEC 60093 >106- 109< Printing Recommendation Typical Range Extruder Temperature Print Speed WWW.3DXTECH.COM 571 Gordon Industrial Court, Suite E Byron Center, Ml 4931 5 US