Technology... Advanced. Technical Data Sheet Rev 2.1 3DXSTAT™ ESD-Safe ABS 3D Filament 3DXSTAT™ ESD-Safe ABS [acrylonitrile butadiene styrene] is a high-performance 3D printing filament formulated utilizing state-of-the-art conductive additives and premium ABS. This filament is ideal for applications that require consistent and reliable electrostatic dissipation [ESD] protection. 3DXSTA"TM ESD-Safe ABS is an amorphous polymer that offers excellent dimensional stability and high thermal resistance. Suitable for use in practically all consumer-grade FDM/FFF printers. Made by 3DXTECH® in the USA. General Property Unit Standard Typical Value The reported technical data was generated from printed ISO test specimen. The general print parameters utilized are noted below. • Desktop FDM/FFF Printer • Nozzle: 0.4mm A2 hardened • Layer height: 0.2mm • Infill: 100%, +/-45° • Extrusion temp: 240°C • Bed temp: 110°C • Bed prep: ABS/Acetone Gel • Print speed: 50 mm/sec Mechanical Property Unit Standard Typical Value Tensile Strength MPa ISO 527 42 Tensile Modulus MPa ISO 527 2131 Tensile Elongation, Break % ISO 527 3.8 Flexural Modulus MPa ISO 178 2274 Flexural Strength MPa ISO 178 80 Thermal Property Unit Standard Typical Value Glass Transition Temperature [Tg] Heat Distortion Temperature [HDT] @ °C ISO 75 102 Electrical Property Unit Standard Typical Value Surface Resistivity Ohm/sq IEC 60093 >106- 1 09< Printing Recommendation Typical Range Extruder Temperature Print Speed WWW.3DXTECH.COM 571 Gordon Industrial Court, Suite E Byron Center, Ml 4931 5 USA