STAINLESS STEEL 17-4PH
1Pages

MATERIAL PROPERTIES MPIF Standard As-sintered Ultimate Tensile Strength (MPa) • Superior surface finish in metal AM • Excellent mechanical properties up to ~600°F (316 °C) • Good weldability & machinability • Magnetic metal alloy • Near wrought part density (>99.0%) INDUSTRIES SERVED Relative Density (%) • Aerospace & Defense • Industrial Equipment • Medical & Dental • Consumer Products Precipitation-hardening martensitic stainless steel V-Notched Charpy (J) Surface Roughness (Ra, μm) As-sintered: 3.2 (125 μin) With Secondary Ops: 0.8 (32 μin) As-sintered: ± 0.3% (± 0.003 in/in) With Secondary Ops: ± 0.1% (± 0.001 in/in) The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each buyer is responsible for determining that the material is safe, lawful, and technically suitable for the intended application. 3DEO makes no warranties, expressed or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement. Product specifications are subject to change without notice. *Additional heat treatment options available upon request. POWDER PROPERTIES Niobium & Tantalum (Nb+Ta) Other Elements: Total may not exceed 1.00% combined. Same chemical composition as the built parts. In accordance with MPIF Standard 35 (2018 Edition) and ASTM UNS S17400 (12th Edition). Strain (mm/mm)