PURE COPPER

Product catalog summary

Specifications
Pure Copper (Cu) specifications are provided for two conditions: As-Sintered and Hot Isostatic Pressed (HIPed). Key mechanical properties include:

Ultimate Tensile Strength: 183 ± 2 MPa (As-Sintered), 194 ± 2 MPa (HIPed)
Yield Strength: 43 ± 3 MPa for both conditions
Elongation: 43 ± 1% (As-Sintered), 50 ± 1% (HIPed)
Electrical Conductivity: 86 ± 2% IACS (As-Sintered), 97 ± 1% IACS (HIPed)
Density: 8.35 ± 0.05 g/cm³ (As-Sintered), 8.93 ± 0.01 g/cm³ (HIPed)
Relative Density: 93.3 ± 0.5% (As-Sintered), 99.7 ± 0.1% (HIPed)
Surface Roughness: 2.5 µm (100 µin)

These properties are measured using ASTM standards E8/E8M, E1004, and B962.

Material Properties
The material is high purity copper (99.9%), known for its ductility, malleability, and excellent thermal and electrical conductivity.

Features
Applications include aerospace, electronic products, industrial equipment and machinery, medical devices, transportation, and power generation and transmission.

Microstructure
The typical composition by weight percentage includes:

Copper (Cu): 99.9%
Carbon (C): 0.015%
Iron (Fe): 0.010%
Phosphorus (P): <0.01%
Oxygen (O): <0.005%
Other elements: Balance

Disclaimer
Performance characteristics may vary based on application and conditions. Buyers are responsible for ensuring material suitability. Specifications are subject to change without notice.

Catalog excerpts

MATERIAL PROPERTIES As-Sintered Hot Isostatic Pressed Test Method • High purity Copper (99.9%) • A ductile and malleable metal • Excellent thermal conductivity Ultimate Tensile Strength (MPa) Electrical Conductivity (% IACS) • Excellent electrical conductivity INDUSTRIES SERVED • Aerospace • Medical Devices • Electronic Products • Industrial Equipment • Power Generation & Machinery & Transmission ASTM B962 Relative Density (TD%) The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each buyer is responsible for determining that the material is safe, lawful, and technically suitable for the intended application. 3DEO makes no warranties, expressed or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement. Product specifications are subject to change without notice. MECHANICAL PROPERTIES Typical Value Strain (mm/mm)

Open the catalog to page 1

All 3DEO, Inc. catalogs and technical brochures

STAINLESS STEEL 17-4PH
1 Page
STAINLESS STEEL 316L
1 Page