Direct Metal Printers Tech Specs
2Pages

Laser Power Type Laser Wavelength 100 W/Fiber laser 1070 nm 300 W/Fiber laser 1070 nm 500 W/Fiber laser1 1070 nm Build Volume (X x Y x Z) Height Inclusive of build plate Layer Thickness LaserForm® metal alloy choices with developed print parameters: LaserForm CoCr (B) LaserForm 17-4PH (B) LaserForm 316L (B) LaserForm CoCr (C) Preset: 30 LaserForm CoCr (B) LaserForm 17-4PH (B) LaserForm Maraging Steel (B) LaserForm 316L (B) LaserForm AlSi12 (B) Preset: 40 pm LaserForm CoCr (B) LaserForm 17-4PH (B) LaserForm Maraging Steel (B) LaserForm AlSi12 (B) Material Deposition Repeatability Minimum Feature Size -x=100 pm, y=100 pm, z=20 pm- Typical Accuracy ± 0.1-0.2% with ± 50 pm minimum ± 0.1-0.2% with ± 50 pm minimum ± 0.1-0.2% with ± 50 pm minimum ACCESSORIES Interchangeable Build Modules na na na 1 Maximum laser power at powder layer is typical 450W for 500W lasers 2 Set up A 3 Set up B 4 Height exclusive of signal tower POWDER MANAGEMENT CERTIFICATION CE marked CE marked, TUV CE marked, TUV 4k 3D SYSTEMS Additive Manufacturing Solutions www.3dsystems.com 3DS-10202C 03-20 Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating conditions, material combined with, or with end use. 3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or fitness for a particular use. © 2020 by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. 3D Systems, the 3D Systems logo, ProX, LaserForm, and 3DXpert are registered trademarks of 3D Systems, Inc.

Direct Metal Printers Metal Additive Manufacturing with the DMP printer series SPECIFICATIONS Laser Power Type Laser Wavelength Layer Thickness Adjustable, minimum 5 µm, typical values: 30, 60, 90 µm Adjustable, minimum 5 µm, typical values: 30, 60, 90 µm LaserForm® metal alloy choices with developed print parameters: LaserForm Ti Gr1 (A)² LaserForm Ti Gr5 (A)² LaserForm Ti Gr23 (A)² LaserForm AlSi10Mg (A)3 LaserForm AlSi7Mg0.6 (A)3 LaserForm Ni625 (A)³ Material Deposition Soft blade recoater Height inclusive of build plate LaserForm Ni718 (A)³ LaserForm 17-4PH (A)³ LaserForm 316L (A)³...