DuraForm® PA Plastic DuraForm® PA Plastic is available in Natural color. • Complex, thin-wall ductwork • Functional prototypes that approach end-use performance properties • Appropriate for low- to mid -volume rapid manufacturing • Medical applications requiring USP Class VI compliance, or biocompatibility - Motorsports - Aerospace • Housing and enclosures • Impellers and connectors • Consumer sporting goods • Vehicle dashboards and grilles • Snap-fit designs • Parts requiring machining or joining with adhesives Durable polyamide (nylon) material for real-world physical testing and functional use. • Excellent surface resolution and feature detail • Easy-to-process • Compliant with USP Class VI testing • Compatible with autoclave sterilization • Good chemical resistance and low moisture absorption • Nicely balanced mechanical properties and processability • Build prototypes that withstand functional testing • Produce durable end-use parts without tooling • Create accurate and repeatable parts as demanded by manufacturers • Machinable and paintable for demonstration parts

DuraForm® PA Plastic For use with all selective laser sintering (SLS®) systems General Properties * N/A = Data not applicable for this test condition Data was generated by building parts under typical default parameters. DuraForm® PA Plastic was processed on a base-level HiQ™ SLS® System at 13 watts laser power, 5 m/sec [200 inches/sec] scan speed, and a powder layer thickness of 0.1 mm [0.004 inches]. 3D Systems Corporation Tel: +1 803.326.4080 [email protected] 333 Three D Systems Circle Toll-free: 800.889.2964 www.3dsystems.com Rock Hill, SC 29730 U.S.A. Fax: +1 803.324.8810 NASDAQ:...