1. Catalogs
  2. 3a Telec
  3. B50 GAS BOTTLE HEATER

B50 GAS BOTTLE HEATER

B50 GAS BOTTLE HEATER

Product catalog summary
Description
The B50 gas bottle wrap-on heater is a flexible and watertight heating panel designed to warm gas bottles. It features two plastic-coated fabrics: a heating red face and an insulated blue face. The heater can maintain the gas bottle temperature up to a maximum of 55°C, compensating for cooling due to gas expansion and preventing pressure drops that hinder gas flow.

Design and Functionality
The heater consists of two independently regulated heating sections: an upper and a lower section. This design allows for compensation of heat losses based on the bottle's filling level, ensuring safety and ease of use. It includes stainless eyelets and elastic quick fastenings on top, with side fastenings using gripping belts to ensure a snug fit around the bottle for optimal heat exchange.

Advantages
The B50 heater covers the entire cylinder, providing uniform and gentle heating while preventing overheating. The insulated face significantly reduces heat loss.

Technical Data
  • Output: 400 W
  • Voltage: 230 V
  • Main supply cord length: 3m
  • Outside dimensions: Height = 1.45 m, Width = 0.80 m
  • Degree of protection: IP54
See more

Catalog excerpts

B50 GAS BOTTLE HEATER-1

B50 GAS BOTTLE HEATER B50 gas bottle wrap on heater is a flexible and watertight heating panel coated with 2 plastic fabrics : an heating red face and an insulated blue face. This gas bottle heater is able to warm up and maintain gas bottle up to 55°C max temperature, by compensating the bottle cooling down due to gas expansion, and thus to avoid the pressure fall which prevents gas from flowing out the bottle. Heater has 2 heating sections which are regulated separately : 1 upper section and 1 lower section ; as a result, these 2 different sections allow to compensate heat losses of the bottle according to its filling level : this is a safe and ready to use device. It is built with stainless eyelets and elastic quick fastening on top, and its side fastening with gripping belts allows to keep the flexible heater wrapped closely around the bottle, and so to get a perfect heat exchange between heating panel and gas bottle. B50 gas bottle wrap on heater covers the full cylinder of the bottle, making homogeneous and soft warming up and avoiding over-heating. Thanks to the insulated face, heat losses are greatly lowered.

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.