Specifications:
The PET blow moulding machine is designed for producing bottles with a maximum capacity of 2.5 liters. It features 4 cavities and can handle bottles with a maximum height of 352 mm and a maximum diameter of 130 mm. The neck diameter for bottles can be up to 38 mm, while preforms can have a neck diameter ranging from 18 to 38 mm. The maximum body diameter of preforms should be less than 2 mm compared to the largest collar neck diameter.

Output:
The machine has a nominal output of 7500 to 8000 bottles per hour for 0.5L bottles with a 13g preform and a 30/25 neck. For 1.5L bottles with a 24g preform and a 30/25 neck, the output is 6400 to 6800 bottles per hour.

Power and Air Requirements:
The machine operates with an installed power of 90 kW and requires a voltage of 3x400V. It uses compressed air at 40 bar pressure, adjustable, with a consumption of 520 Nm3/h for 1.5L bottles. Pre-blowing pressure ranges from 1 to 15 bar, and the dew point is maintained at +3°C. The machine recovers 8 bar from the 40 bar blowing process.

Water Requirements:
The machine requires a water flow of 4 m3/h with cooling water pressure at 3 bar.

Additional Features:
The machine can produce oval bottles and hot fill bottles, and it supports neck orientation. It is manufactured in France, with contact information provided for further inquiries.