6MO

6MO

6MO

Product catalog summary
Specifications:
  • Model: 6MO
  • Cavities: Suitable for bottles up to 1.2 L, including oval bottles.
  • Output: Nominal output for standard bottles is 8000 - 9000 bottles/hour for 0.5 L bottles with a 13 gr preform and 30/25 neck, and 7000 - 7500 bottles/hour for 1.5 L bottles with a 32 gr preform and 30/25 neck.
  • Neck Orientation: N Neck orientation available.
  • Hot Fill: HF option for Hot Fill bottles.
Procedures:
  • Adjustable blowing pressure ranging from 1-15 bar.
  • Pre-blowing pressure and dew point are set at +3°C.
  • Air recovery from 40 bar blowing is ≤ 40 bar (1L) at 420 Nm³/h.
Norms:
  • Maximum body diameter should be less than 2 mm compared to the largest collar neck diameter.
  • Neck diameter ranges from 18 to 38 mm.
  • Maximum height is 352 mm, and maximum diameter is 70/100 mm.
Recommendations:
  • Power consumption is reduced by 40% for electricity and 20% for compressed air.
  • Installed power is 130 Kw with a voltage of 3x400 V + Gr.
  • Water flow for cooling is 4 m³/h at 3 bar pressure with a temperature of approximately 10°C.
Contact Information:
  • Address: 25 Zone d’Activités les Quatre Vents, 95650 Boissy l'Aillerie, FRANCE
  • Phone: +33 (0) 9 800 820 70
  • Email: [email protected]
  • Website: www.1blow.com
See more

Catalog excerpts

6MO-1

Cavities Bottles up to 1.2 L Oval bottles Cavités Bouteilles jusqu'à 1,2 L Bouteilles ovales Output : Nominal output (+/-5%) for standard bottles 8000 - 9000 b/h - 0.5 L - 13 gr preform - 30/25 neck / col 7000 - 7500 b/h - 1.5 L - 32 gr preform - 30/25 neck / col Neck orientation OPTION HF Hot Fill bottles

 Open the catalog to page 1
6MO-2

MODEL Information : Adjustable blowing pressure Pre-blowing pressure Dew point Recovered from 40 bar blowing Pression de soufflage ajustable Pression de pré-soufflage Point de rosée Air récupéré du soufflage 40 bar Installed power Voltage Puissance installée Tension maximum Power consumption depending on preform / Bottle Water flow Cooling water Water Temperature Débit d'eau Pression d'eau de refroidissement Température d'eau Hauteur maximum Diamètre maximum Preforms : Diamètre de col Neck diameter 18 to 38 mm Max body diameter : Less than 2 mm regarding biggest collar neck diameter Diamètre...

 Open the catalog to page 2

All 1 BLOW catalogs and technical brochures

  1. 5M

    2  Pages

  2. 2XL

    2  Pages

  3. 1XXL

    2  Pages

  4. MODEL 2XLs

    2  Pages

  5. MODEL 4XLs

    2  Pages

  6. MODEL 4 L

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.