Model Overview:
The COMBIMODEL 5M is designed for producing bottles up to 1.5 liters, operating inline with the filler. It features 5 cavities and is optimized for both standard and hot fill bottles.

Output Specifications:
- Nominal output for standard bottles is 8000 - 9000 bottles per hour for 0.5 L bottles with a 13 gr preform and 30/25 neck.
- For 1.5 L bottles with a 24 gr preform and 30/25 neck, the output is 7000 - 7500 bottles per hour.

Technical Specifications:
- Maximum neck diameter: 18 to 38 mm
- Maximum body diameter: Less than 2 mm difference from the largest collar neck diameter
- Maximum height: 352 mm
- Maximum diameter: 70 / 110 mm

Preform and Blowing Details:
- Adjustable blowing pressure: ≤ 40 bar for 1.5L bottles
- Pre-blowing pressure: 1-15 bar
- Dew point: +3°C
- Recovered air from 40 bar blowing: 420 Nm³/h

Power and Water Requirements:
- Installed power: 85 Kw
- Voltage: 3x400 V + Gr
- Water flow: 4 m³/h
- Cooling water pressure: 3 bar
- Water temperature: ≈ 10°C

Options and Efficiency:
- The model offers options for reduced power consumption and compressed air usage, with potential savings of up to 40% in electricity and 20% in compressed air.

Contact Information:
Address: 25 Zone d’Activités les Quatre Vents, 95650 Boissy l'Aillerie, France
Phone: +33 (0) 9 800 820 70
Email: [email protected]
Website: www.1blow.com