USYS 20
1 / 4ページ

カタログの抜粋

Economic Processor for Diameter or Capacitance Measurement, Data Acquisition, Processing, Display & Control

HIGH-TECH, INDUSTRIAL DATA ACQUISITION SYSTEM WITH A HUMAN TOUCH The system features real-time, multi-tasking data processing and control. USYS 20 accepts measurements from a broad line of ZUMBACH gauges covering a diameter or width range from 0.012 mm (0.00047 in.) to 550 mm (21.6 in.) with a selectable resolution of up to 0.0001 mm (0.000004 in.). • Complete system for one measuring point • Simultaneous display of 3 measured values • Industrial, rugged design • High-contrast LCD monochrome screen (240 x 128 pixels) • Alarm displays • Real-time data collection • Reel and session reports •...

カタログの2ページ目を開く

REAR PANEL INPUTS, OUTPUTS AND PERIPHERALS (OPTIONS) Measuring head connector One unit from the wide range of digital 1, 2 or 3 axis ODAC diameter measuring heads can be connected. Instead of the diameter measuring head, it is also possible to connect a capacitance measuring system of the CAPAC J series. Port 1 Serial interface Can be configured for the connection with a printer (Continuous or label printer) or a remote display. Port 2 Serial interface 1 axis measuring heads For the communication with a higher level host computer or the connection with USYS Data Log from Zumbach or a remote...

カタログの3ページ目を開く

USYS DATA LOG The USYS Data Log is a WindowsTM based software, offering an easy way to configure specific data acquisition (logging and archiving) from ZUMBACH processors onto customer PCs. The measurement data can be collected from a single instrument or from several ZUMBACH processors and saved in a text file format or in ExcelTM. USYS Data Log communicates with the processors through a serial interface or an Ethernet TCP/IP connection. ™ Windows and Excel are trademarks of Microsoft Corporation Multiple Collection Several USYS Data Log programs can run on the same PC, i.e. it is possible...

カタログの4ページ目を開く