カタログの抜粋
JC35W2 Linear Actuator JC35W2 is similar with JC35W1, which is also a model of W series. A more powerful motor makes JC35W2 thrust up to 3000N yet compact size. It is also available for signal feedback of hall sensors. JC35W2 can be widely used to hospital beds, patient lift, TV lift and etc. where space is limited. Features And Options Dynamic Load Push(N): Dynamic Load Pull (N): Colour: Protection Class: Stroke Length: Installation Dimension: Noise Level: Optional: Limit Switch: Weight: Static Bending Moment: Approval:
カタログの1ページ目を開くUsage Duty Cycle: Operating Temperature: Reserve Temperature: Matching with JIECANG control boxes Relative Humidity: Atmospheric Pressure: Dimensions Front clevis F47, end clevis 37
カタログの2ページ目を開くFront clevis 80, end clevis 40
カタログの3ページ目を開くTechnical Specifications (Standard Value) Input voltage (VDC) Speed at no load/full load (mm/s) Current at full load (A) Remarks: It can achieve better self-locking ability with Jiecang control box; The above data is the standard value of the test data (inspection specification) at room temperature of 25℃.
カタログの4ページ目を開くDiagram of relationship between stroke length and load Characteristic Curve Typical speed Min. speed Typical current Max. current
カタログの5ページ目を開くTypical speed Min. speed Typical current Max. current
カタログの6ページ目を開くTypical speed Min. speed Typical current Max. current
カタログの7ページ目を開くTypical speed Min. speed Typical current Max. current
カタログの8ページ目を開くOrdering Key Take JC35W2028D524300/420VG40L800020D5 as an example Model Optional features 0 = Standard / Y = Hall sensor Speed at full load Input voltage Stroke length/ lnstallation dimension 24 = 24VDC Stroke length = xxx Installation dimension = xxx Clevis directions H=horizontal V=vertical (to motor direction) 37 = W-type end clevis, hole diameter 8.0 40 = W-type end clevis, hole diameter 10.1 F47 = W-type, hole diameter of top clevis 8.0 80 = W-type, hole diameter of top clevis 10.1 0 = Standard, without brake Front clevis specification Type of connector and cable Cable length
カタログの9ページ目を開くOrdering Details Dimensions of clevis End clevis: 37
カタログの10ページ目を開くMotor cable 4 Pin Din connector (standard) Supporting control box : JCB35Q / JCB35T / JCB35R / JCB35R1 / JCB35S power with positive voltage, actuator going up Outer Circle Not connected power with positive voltage, actuator going down 5 Pin Din connector (with Hall sensor) Supporting control box : JCB35Q / JCB35T / JCB35R / JCB35R1 / JCB35S power with positive voltage, actuator going down power with positive voltage, actuator going up Hall sensor signal 1 Outer Circle Hall sensor signal 2
カタログの11ページ目を開くCommunication protocol development Professional customization Intelligent Control of Bluetooth better choices Wireless Communication Latest Weighing System Disclaimer and Exclusion of Liability The user must determine the suitability of JIECANG products under specific conditions. JIECANG is committed to providing the latest product information. However, as JIECANG’ s product are constantly improving, it is possible to make changes to JIECANG’ s product without prior notice. Therefore, JIECANG cannot guarantee the correctness and authenticity of the product information. Although JIECANG will...
カタログの12ページ目を開くZhejiang Jiecang Linear Motion Technology Co.のすべてのカタログと技術パンフレット
-
JC35L28
9 ページ
-
JC35L30
11 ページ
-
JC35L35
7 ページ
-
JC35TMQ
4 ページ
-
Linear Actuator JC35D4
15 ページ