RL series
1 / 9ページ

DATA SHEET LOW OHMIC CHIP RESISTORS RL series 5%, 2%, 1% sizes 0402/0603/0805/1206/ 1210/1218/2010/2512 Product specification – June 01, 2017 V.2 RoHS compliant & Halogen Free

YAGEO Phfcomp_ Product specification 2 Chip Resistor Surface Mount SERIES SCOPE This specification describes RL0402 to RL25I2 low ohmic chip resistors with lead-free terminations made by thick film process. APPLICATIONS • Converters • Printer equipment • Server board • Telecom • Consumer • Car electronics FEATURES • AEC-Q200 qualified • Halogen Free Epoxy • RoHS compliant • Hazardous wastes • High component and equipment reliability • Saving of PCB space • Non-forbidden materials used in products/production • Low resistances applied to current sensing • MSL Class: MSL 1 ORDERING INFORMATION...

Product specification PHYCOMP BRAND ordering codes Both GLOBAL PART NUMBER (preferred) and I2NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE SIZE TYPE EMBOSSED (2) PAPER/PE (2) TAPE ON REEL TAPE ON REEL (units) 4,000 5,000 10,000 Resistance decade (3) Last digit Ordering example The ordering code of a RL0603 chip resistor, value 0.56 Q with ± 1 % tolerance, supplied in tape of 5,000 units per reel is: 235051212567L...

YAGEO Phfcomp_ Product specification 4 Chip Resistor Surface Mount SERIES E-24 series / Non-E series (R= 25/40/50/60/250/400/500 mQ):3 digits The “R” is used as a decimal point; the other 2 digits are significant. E-24 series / Non-E series (R= 25/40/50/60/250/400/500 m Q): 4 digits The “R” is used as a decimal point; the other 3 digits are significant. For further marking information, please see special data sheet “Chip resistors marking”. CONSTRUCTION The resistors are constructed out of a high-grade ceramic body. Internal metal electrodes are added at each end and connected by a...

YAGEO Phfcomp_ _ 5 Product specification YAGEO Phfcomp_ _ 5 Product specification ELECTRICAL CHARACTERISTICS Table 2 Power Operating Temp. yp P7o range Resistance range & tolerance ( ppm/°C) H Max. resistance 20m0 Rated current I.5A Max. resistance 20m0 Rated current 2A Max. resistance 20m0 Rated current 2.5A Max. resistance 20m0 See following table Rated current 3.5A "T.C.R.- RL series" TYPE / RESISTANCE RANGE TEMPERATURE COEFFICIENT OF RESISTANCE RL0402 50mQ<R<IQ ± 1,500 ppm/°C ± 1,200 ppm/°C ±800 ppm/°C ±300 ppm/°C For recommended footprint and soldering profiles,...

Product specification Chip Resistor Surface Mount PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE REEL DIMENSION Paper taping reel (R) Embossed taping reel (K) NOTE 1. For paper/embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”. FUNCTIONAL DESCRIPTION OPERATINGTEMPERATURE RANGE Normal Power: Range: –55 °C to +155 °C (Fig. 5) Double Power: Range: –55 °C to +125 °C (Fig. 6) POWER RATING Each type rated power at 70 °C: RL0402=1/16 W; RL0603=1/10 W; RL0805=1/8 W, 1/4W; RL1206=1/4 W, 1/2W;...

Product specification 0402 to 2512 TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST _TEST METHODPROCEDUREREQUIREMENTS Life/ IEC 60115-1 4.25.1 1,000 hours at 70+2°C applied RCWV +(2% +0.5mQ ) Endurance MIL-STD-202 Method 108A I.5 hours on, 0.5 hour off, still air required High Temperature IEC 60068-2-2 1 ,000 hours at maximum operating +(! % +0.5mQ ) Exposure temperature depending on specification, unpowered No direct impingement of forced air to the parts Normal power : Tolerances: I55+5C Double power : Tolerances: I25+5C Moisture...

Product specification

Product specification " Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products Itself are unchanged. Any product change will be announced by PCN.”