TEMPRO Temperature Controllers
1 / 12ページ

TEMPRO Mold temperature Controllers Superior Temperature Control world of innovation

TEMPRO plus D Touch-Screen Series for Perfect Quality Latest design technology and operation … Booster pump (for filling under pressure at temperatures of more than 100 °C) In pressurized operation, a gauge ensures that the internal pressure is always 1 bar min. over the steam pressure curve. Touch-screen display, 5.7", Windows CE Because of the smaller heat exchanger there is less circulating water. As a result, the preheating time and the cool down period have been reduced. Heat exchanger made of stainless steel (Incoloy heating element) Pump and system pressure gauges Maintenance free...

Circulating water single and dual zone units TEMPRO plus D90 for temperatures up to 90 °C. Open system with powerful, submersible pumps without pump seals. Equipment TEMPRO plus D Self-optimizing temperature control via microprocessor Maximum temperature monitoring Sensor break monitoring Automatic filling with leakage and pressure monitoring Automatic pump rotation direction detection Dry contact for alarm output plus audible alarm Connectors for external sensors PT 100 Connector for external mold sensor FeCo Type J • Mold purging via pump (max. 3 l) Pump characteristics TEMPRO plus D90...

TEMPRO plus D100/140/160/180 – pressure units Circulating water single and dual zone units Pressurized system with powerful pumps and with magnetically coupled pumps for graduated temperature ranges. Equipment TEMPRO plus D Self-optimizing temperature control via microprocessor Maximum temperature monitoring Sensor break monitoring Automatic filling with leakage and pressure monitoring Automatic pump rotation direction detection Mold purging via pump (unlimited) Dry contact for alarm output plus audible alarm Connectors for external sensors PT 100 Connector for external mold sensor FeCo...

TEMPRO plus D Micro Compact dual zone temperature controller Pressurized water temperature controller With powerful pumps, direct heating, indirect or direct cooling and supply temperatures of up to 160 °C as dual zone units. Equipment TEMPRO plus D Micro Touch-screen with set and actual temperature indication Leakage, water level and pressure control Self-optimizing temperature control via microprocessor (± 0.2 °C) Heater control via solid state relay External sensor socket for PT 100 thermocouple Mold purging via pump Isolated contact for alarm Flow measurement (optional) Connector FeCo...

»» The economic solution The ideal temperature controller for any application requiring exact temperature control and high user-friendliness, however without additional functions such as direct cooling. »» TEMPRO primus C90 Single zone temperature controller up to 90 °C. Standard features include air purging for mold changes. Equipment TEMPRO primus C90 Self-optimizing temperature control via microprocessor Maximum temperature monitoring Sensor break monitoring Automator filling with leakage monitoring and level control Leakstop function possible through modification Mold purging via pump...

»» The economic solution The ideal device for any application requiring exact temperature control and high user-friendliness, however without additional functions such as direct cooling. »» TEMPRO basic C90 One circuit temperature controller for temperatures up to 90 °C equipped with a self-optimizing microprocessor controller (± 1 °C). Standard with leakstop function and pump switch for mold purging when changing the mold. »» TEMPRO basic C140 Single zone unit with pressurized system for temperatures up to 140 °C. The economic temperature controller for precise temperature control up to...

»» The TEMPRO primus C120 is used for temperatures up to 120 °C. Due to direct injection of the cooling water, it is providing an exceptionally high cooling capacity. »» The TEMPRO basic C120 was designed for the special requirements of specific applications. It is equipped with radial pumps for high flow volumes at different pressure ranges: an economic series with high user-friendliness and an extensive equipment range for every application. Equipment TEMPRO Self-optimizing temperature control via microprocessor Maximum temperature monitoring Sensor break monitoring Automator filling with...

TEMPRO plus D L120 especially for large consumers, is equipped with radial pumps offfering high volume flow rates for different pressure ranges. A series with high ease of use, touch-display and many possibilities for every application. Equipment TEMPRO plus D L120 Self-optimizing temperature control via microprocessor Maximum temperature monitoringv Sensor break monitoring Automator filling with pressure monitoring Dry contact for alarm output Connector for external sensor PT 100 Automated mold purging through pressurized air Enhanced pump 5,7" TFT color touch display (full text display...

TEMPRO plus D oil device »» With thermo-oil Perfect quality up to 300 °C. »» Double level control Refill warning, automatic switch-off. »» Precision control Microprocessor controlled until ± 0.5 °C accuracy. »» Process pressure gauges standard »» Magnetically coupled pump without seal »» User-friendly touch-screen display »» Line evacuating for mold purge Equipment TEMPRO plus D Oil Device Self-optimizing temperature control via microprocessor (± 0.5 °C) Maximum temperature monitoring Automatic heater control (max. heating power 16 kW) Process pressure gauges standard Level control...

Water units WITTMANN‘s TEMPRO plus D L90 can heat up even big molds within a short time to the required set point. Besides the strong heater (36 kW) we have reinforced flow (up to 200 l/min) and cooling capacity. Purge out of molds is supported by an additional pump which pumps the water to the return line or drain. Thus the purge volume is increased. Equipment TEMPRO plus D L90 Self-optimizing temperature control via microprocessor Maximum temperature monitoring Sensor break monitoring Automatic filling with leakage monitoring and level control Dry contact for alarm output plus audible...