WDG 53V
1 / 7ページ

カタログの抜粋

Wachendorff Automation ... systems and encoders • Complete systems • Industrial rugged encoders to suit your application • Standard range and customer versions • Maximum permissible loads • 48-hour express production • Made in Germany • Worldwide distributor network WDG 53V Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2018-12-04 -1-

カタログの1ページ目を開く

MflCHENDORFF Automation GmbH & Co. KG Extremely rugged and economical encoder with short measurements Easy screw mounting Protection to IP68 all around Optional: -40 °C up to +85 °C Resolution Max. pulses per revolution up to 1500 PPR PPR Pulse frequency Mechanical Data Housing Flange screw flange Starting torque nut max. 10 Nm Flange material stainless steel, V2A TTL < 1500 ppr: max. 200 kHz HTL < 1500 ppr: max. 200 kHz AB ABN and inverted signals max. 40 mA / channel Circuit protection circuit type H24 and R24 only Accuracy Phase offset 90° ± max. 7.5 % of the pulse...

カタログの2ページ目を開く

MflCHENDORFF Automation GmbH & Co. KG Cable connection K2, L2 with 2 m cable Description ABN inv. poss. K2 axial, shield not connected • L2 axial, shield connected to encoder housing • WDG 53V Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2018-12-04 -3-

カタログの3ページ目を開く

MflCHENDORFF Automation GmbH & Co. KG Sensor-connector (M12x1) SB, 4-, 5-, 8-pin Description ABN inv. poss. SB4 axial, 4-pin, Connector connected to encoder housing - SB5 axial, 5-pin, Connector connected to encoder housing - SB8 axial, 8-pin, Connector connected to encoder housing • WDG 53V Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2018-12-04 -4-

カタログの4ページ目を開く

MflCHENDORFF Automation GmbH & Co. KG OptionsLow temperature Order key The encoder WDG 53V with the output circuit types H24, R24 is also available with the ACA extended temperature range -40 °C up to +80 °C (measured at the flange). The encoder WDG 53V can be supplied with more than 2 m cable. The maximum cable XXX = Decimeter length depends on the supply voltage and the frequency; see www.wachendorff-automation.com/atd Please extend the standard order code with a three figure number, specifying the cable length in decimetres. Example: 5 m cable = 050 WDG 53V Errors and modifications...

カタログの5ページ目を開く

MflCHENDORFF Automation GmbH & Co. KG

カタログの6ページ目を開く

WACHENDORFF Automation GmbH & Co. KG For further information please contact our local distributor. Here you find a list of our distributors worldwide. https://www.wachendorff-automation.com/ WDG 53V Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2018-12-04 -7-

カタログの7ページ目を開く