カタログ >
Wachendorff Automation GmbH & Co. KG >
Assembly instructions draw-wire system SZG93 with absolute encoder WDGA CANopen

Assembly instructions draw-wire system SZG93 with absolute encoder WDGA CANopen
1 / 3ページ

カタログの抜粋

Assembly instructions draw-wire system SZG93 with absolute encoder WDGA CANopen - 1

MflCHENDORFF Automation GmbH & Co. KG Wachendorff Automation GmbH & Co. KG IndustriestraBe 7 • D-65366 Geisenheim Tel.: +49(0) 6722/99 65-25 • Fax: +49(0) 6722/99 65-70 E-Mail: wdg@wachendorff.de • www.wachendorff.de • Exceptionally rugged length sensor • Measuring range: 0 - 2.500 mm • Interface: CANopen CiA 406 • free configurable • IP65 absolute encoder WDGA CANopen ready-mounted www.wachendorff-automation.com/szg93wdgacan The draw-wire encoder SZG93 WDGA CANopen was developed for use in harsh environments. The various methods of installation mean high flexibility. It can be used even where space is tight, thanks to its compact dimensions. The SZG93 WDGA CANopen can be mounted quickly and with its highly precise mechanics provides reliable accurate length measurement, with all advantages, which result from an absolute lenght measurement. e. g. The position-value is saved, if supply breaks down and is available immediately if supply gets recovered. Doing a reference run isn't necessary. The intelligent spring-suspension and the nylon-coated stainless-steel wire cable guarantee long-service life, even in difficult operating conditions. The encoder is already installed. Resolution measurement ranges WDGA36Z: Interface: Deviation: Measuring wire: Wire connection: max. wire speed: Pull out strength: CANopen CiA 406 Less than 0.02 % of the final value. 0.48 mm of thick nylon coated high-grade steel wire. (incl. coating) eye, see drawing 7.5 m/sec. approx. 0.5 kg System-unit housing: Glass fiber reinforced ABS plastic Weight: SZG incl. encoder 0,815 kg Life expectancy: Operating temperature: Storage temperature: at least 10 million cycles -20 °C up to +80 °C -30 °C up to +80 °C Connection configuration for encoder WDGA CANopen: Interface Protocol: CAN CANopen - Communication profil CiA 301 - Device Profile for encoder CiA 406 V3.2 class C2 Node number: 0 up to 127 (default 127) Baud rate: 10 kBaud up to 1 MBaud with automatic bit rate detection The standard settings as well as any customization in the software can be changed via LSS (CiA 305) and the SDO protocol, e. g. PDOs, Scaleing, Heartbeat, Node-ID, Baud rate, etc. It is recommend to configure object 6000 h resolution and direction to ccw. Programmable CAN transmission modes • Sychronous mode: when a synchronisation telegram (SYNC) is received from another bus node, PDOs are transmitted independently. • Asynchronous mode: a PDO message is triggered by an internal event. (e.g. change of measured valued, internal timer, etc.) All details in mm and dependent on the encoder configuration Electrical Data: Supply voltage: 10 VDC up to 30 VDC 2016-10-05 / Errors and modifications reserved.

カタログの1ページ目を開く

Assembly instructions draw-wire system SZG93 with absolute encoder WDGA CANopen - 2

Ordering information: Measurement range: 2500 = 2,500 mm Measurement wire: N = 0.48 mm of thick nylon coated high-grade steel wire Mounting direction: UP = Wire exit up DN = Wire exit down FR = Wire exit front BK = Wire exit back Single turn resolution in bit per revolution: ( 2500 mm measurement ranges) 8 => 8 bit (= approx. 1.3 position /mm) 9 => 9 bit (= approx. 2.5 position /mm) 10 => 10 bit (= approx. 5.1 position /mm) 11 => 11 bit (= approx. 10.2 position /mm) 12 => 12 bit (= approx. 20.4 position /mm) 13 => 13 bit (= approx. 40.9 position/mm) Multi turn resolution 18 = 18 bit example...

カタログの2ページ目を開く

Assembly instructions draw-wire system SZG93 with absolute encoder WDGA CANopen - 3

MflCHENDORFF Montageanleitung absolute Drehgeber WDGA EnDra®, CANopen, Assembly instructions for WDGA EnDra®, CANopen absolute encoder, Instructions de montage, capteur angulaire WDGA EnDra®, CANopen, Istruzioni per l'uso trasduttore assoluto WDGA EnDra®, Wachendorff Automation GmbH & Co. KG IndustriestraBe 7 • D-65366 Geisenheim Tel.: +49(0) 6722/99 65-414 Fax: +49(0) 6722/99 65-70 E-Mail: support-wdga@wachendorff.de CANopen, Instrucciones de montaje codificador absoluto WDGA EnDra®, CANopen. Montage nur qualifiziertes Personal Assembly only qualified personnel Montage pair qualifie...

カタログの3ページ目を開く