Three-phase asynchronous compact drives
1 / 24ページ

Three-phase asynchronous compact drives

Cover picture Compact drives

Advantages of compact drives 4 Product range of VEM compact drives 5 Compact drives of series M21 ... T 0.55 to 7.5 kW 6 (vector controlled version) General technical data series M21 ... T 7 Drive selection data series M21R ... T 8 Dimensions and dimensional drawings 14 Compact drives of series M21 ... VS 5.5 to 22 kW 16 (VS = vector controlled version) General technical data series M21 ... VS 17 Drive selection data series M21R ... VS 18 Dimensions and dimensional drawings 20

Advantages of compact drives The basis of VEM compact drive are two components, the robust VEM grey cast iron motor and a drive electronic that is optimised for motor operation. When thinking about the engineering design, the most importance was attached to a high vibration strength of the inverter and a sound design of the whole drive unit. Whereas the inverters of the design series M21...T will be cooled by the ventilator of the motor, the inverters of the design series M21... possess a separate ventilation system. The compact drives are available in all standard types of construction,...

Product range VEM compact drives Design series M21 ... T 0.55 to 7.5 kW, vector controlled Design series M21 ... 5.5 to 22 kW, vector controlled (VS) 5

Compact drives of series M21 ... T 0.55 to 7.5 kW (vector controlled design) For this design variation the cooling of the inverter is integrated in the cooling system of the motor, that means the cooling will be done by the ventilator of the motor or if necessary by an axially mounted forced-ventilation unit of the motor. Due to favourable motor connection of the inverter and the small dimensions, the mounting space of the standard asynchronous motor will be exceeded only slightly. The special product advantages of this design variation are: • type of protection IP 55, IP 66 as option •...

General technical data series M21 ... T screwed cable gland of the inverter for simultaneous operation of Profibus Activation and supply module for hol- ding brake for installation in a screwed cable gland of the inverter.

Drive selection data series M21R ... T Surface cooled design version All data is valid for the design at 400 V, 50 Hz and for the factory settings of the inverter with constant torque and slip compensation 100% data on name plate no load sound power level load with reduced nominal torque

Drive selection data series M21R ... T Surface cooled design version All data is valid for the design at 400 V, 50 Hz and for the factory settings of the inverter with constant torque and slip compensation 100%. data on name plate no load sound power level load with reduced nominal torque

Drive selection data series M21R ... T Surface cooled design version All data is valid for the design at 400 V, 50 Hz and for the factory settings of the inverter with constant torque and slip compensation 100%. no load sound power level

no load sound power level

Dimensions and dimensional drawings

Compact drives of series M21 ... VS 5.5 to 22 kW (vector controlled design version) The inverter is fitted with a ventilation system that is independent of the motor. The speed of the drive can be adjusted without external control panel in the standard design version (M version). Comfortable means of operation are: • external unit for operation and change of parameters • serial interface RS 485 • Bus connections • customer modified interface Remarkable is the variety of serial interfaces: • 8 digital inputs with free choice of parameters and potential separation • 2 analogue inputs with...

General technical data series M21 ... VS design M + unit for operation and parameter

Dimensions and dimensional drawings Type of construction IM B3 Type of construction IM B5 Type of construction IM

Type of construction IM B34 Type of construction IM B35

Three phase standard motors • Foot and flange design • Installed star-delta-switch • Explosion protection for the types of protection EEx e, • Motors with seawater protection • With forced ventilation • Design version with thermal winding protection • Energy saving motors according to CEMEP and EPAct • Brake motors • Motors for use in mechanical smoke and heat exhaust • Helical gear motors • Helical worm gear motors • Adjustable gear motors Three-phase asynchronous motors up to shaft height 400, IP 55 low voltage design Squirrel-cage and slip-ring motor up to 500 kW with mechanical and...

arture graphik design Carl-Friedrich-Gauß-Strasse 1 D-38855 Wernigerode Telephone: +49 - (0) 39 43 - 68 - 0 Telefax: +49 - (0) 39 43 - 68 - 21 20 E-Mail: motors@vem-group.com Hompage: www.vem-group.com VEM motors Thurm GmbH Äußere Dresdner Strasse 35 D-08066 Zwickau Telephone: +49 - (0) 375 - 427- 0 Telefax: +49 - (0) 375 - 427- 383 E-Mail: motorsthurm@vem-group.com Homepage: www.vem-group.com we get things moving VEM/06-001 E/0107 GD Printed in the Federal Republic of Germany. Changes reserved. VEM motors GmbH