641 - PM-4 PM-5 Pressure controller for Series 64
1 / 10ページ

Gate valve control system Control and isolation valve General purpose stainless steel valve Adaptive pressure control with stepper motor or throttling by adjustable 3-position pneumatic actuator Body material stainless steel Throttling gate valve with 3-position pneumatic actuator double acting with position indicator with solenoids Ordering numbers (specify control voltage) CF-F CF-F metric threads UNF threads with position indicator, without solenoids: 640 . . - . E28 Control gate valve with stepper motor Pressure controller Ordering numbers local and remote control remote control with service box interface PFO = Power Failure Option (valve closes at power failure) Connection cable Control gate valve — pressure controller Ordering numbers VAT Vakuumventile AG, CH-9469 Haag, Switzerland

Series 64 Sealing materials Gate: Bonnet: VITON Rotary feedthrough / VITON 1 valve gate 2 ball guidance 3 leaf spring 4 ball pairs 5 detents 6 crank bolt 7 gate seal 8 actuator shaft 9 counter-plate a valve seat side VATLOCK configuration The valve gate acts as a throttling element and varies the conductance of the valve opening. Actuation is performed either with a 3-position pneumatic actuator or with a stepper motor and controller. With the 3-position pneumatic actuator, it is not only possible to move the valve gate to the open and closed position, but also to any preset intermediate...

Gate valve control system Technical data Leak rate: body, valve seat Differential pressure - Valve closed DN 100 - 200 DN 250 - 400 - During opening / closing ≤ 2 bar in either direction ≤ 1.2 bar in either direction ≤ 30 mbar Cycles until first service Operating temperature - Valve body Ambient temperature - Pneumatic actuator, motor - Position indicator - Solenoid 1) Material - Valve body, gate - Mechanism (vertical mounting position: see «Options») Valve position visual (mechanical and on controller) Connections actuator - 3-position pneumatic actuator compressed air (see table below) -...

Certain options are not available for some nominal diameters or cannot be combined. Moreover, options can affect the general technical data. Actuator: - Actuator rotated by 90° / 180° to position 2 or 3 (position 1 is standard): see dimensional drawings on pages 88 and 89 for optimum adaptation - Actuator on B-side (A-side is standard) - Stepper motor for vertical mounting position DN 400 (closing time 15 s, cycles until first service 50 000) - Solenoids for impulse actuation: actual valve position is maintained at power failure - Solenoid separate, for external mounting - Solenoid for 12,...

Gate valve control system a valve seat side g required for dismantling b compressed air connection standard actuator position (A1) optional actuator positions e mechanical position indication i for attachment c electrical connection

a valve seat side g required for dismantling b compressed air connection 1) e mechanical position indication i for attachment c electrical connection standard actuator position (A1) optional actuator positions L + W, DN 100: without pneumatic connection 6 mm shorter VAT Vakuumventile AG, CH-9469 Haag, Switzerland

Gate valve control system Flange dimensions ISO-F a valve seat side O.D. 12" VAT standard, O.D. 13 1/4" option Ordering information for option: O.D. 13 1/4" Ordering No. of valve-X (e. g. 64048-UE48-X, X = O.D. 13 1/4")

Series 64 Flange dimensions mm ASA-LP DN 100 - 400 (4" - 16") with or without O-ring groove For orders with O-ring groove specify: «A», «B» or «A + B» a valve seat side

Gate valve control system Pressure controller PM-5 PM-5: Version for local and remote control PM-4: Version for remote control Features Fast and accurate adaptive pressure control Automatic learning of system parameters Hold function for plasma ignition Position control Local operation Operation with remote control interface Large information display Interface for linear pressure sensors (capacitance manometers) Zero adjust of sensor Closing of valve at power failure (option) Pressure control The PM-4 / PM-5 controllers ensure fast and accurate pressure control. The LEARN function, being...

- operation of all functions, selectable baudrate (110 - 19200) Digital inputs - opening and closing of valve Digital outputs - valve position open and closed Power Failure Option This function is available as an option. It automatically closes the valve at power failure. Technical data Mains voltage Power required Ambient temperature Pressure control accuracy 0.1 % of the sensor full scale range Position control Pressure sensor - Sensor input voltage - Sensor input - Sensor power supply 0 - 1 V, 2 V, 5 V, 10 V (selectable) differential, R i > 100 kOhm + 15 V (± 5 %), max. 1400 mA *) – 15 V...