PD Plus 3200 TH-048
1 / 2ページ

{{requestButtons}}

カタログの抜粋

PD Plus 3200 TH-048 - 1

High Pressure Industrial Blowers Model 3200 Heavy Duty Bi-directional Rotation 17 Series - Horizontal Air Flow 46 Series - Vertical Air Flow 57 Series - Horizontal Flow, Single Envelope Gas Service 81 Series - Vertical Flow, Single Envelope Gas Service 64 Series - Horizontal Flow, Double Envelope Gas Service 67 Series - Vertical Flow, Double Envelope Gas Service Model 3200 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 15 PSIG pressure boost or 17” Hg dry vacuum (24” Hg water injected). 17/46 Series This series has wide application in pneumatic conveying, wastewater treatment, and the general process industry where high pressure, high volume air is required. Seal areas are vented to atmosphere to relieve process pressure against the internal lip seals, and to provide oilfree air. 57/81 Series (Single Envelope Gas Service) This series is utilized in such applications as closed loop pneumatic conveying, process gas handling, or elevated pressure applications up to 100 PSIG discharge. Vent openings are tapped and plugged to prevent gas leakage. These fittings can also accept an inert gas purge for positive containment of the process gas. 64/67 Series (Double Envelope Gas Service) This series is built to laboratory standards where virtually complete sealing is required. In addition to the features shown on the 57/81 series, the drive shaft is mechanically sealed and the oil sumps are plugged to provide an even higher degree of leakage protection. Optional Cooling Coils: All vertical flow 3200 PD PLUS models are available with cooling coils to provide cooling of lubricating oil with less than 0.5 GPM cooling water for high performance applications. Specify “W” suffix. Max. Max. Nom. Min. RPM Nom. Max. RPM Model Displ. Press. Vac. at Max. Disch. at Max. Disch. Size CFR PSI (in. Hg) Pressure Pressure Material Specifications: Housing: Cast iron End Plates: Cast iron End Covers: Gear end - Cast iron Free end - Aluminum Rotors: Ductile iron Shafts: Ductile iron cast integrally with rotor Bearings: Gear end - Double row ball Free end - Single row ball Drive shaft - Double row ball Drive Shaft: Ductile iron Gears: Heat treated alloy steel, helical cut Seals: 17/46 series - Lip and labyrinth type on rotor shafts; lip seal on the drive shaft. 57/81 series - Mechanical and labyrinth type on rotor shafts; lip seal on the drive shaft 64/67 series - Same as 57/81 series plus mechanical sealing on the drive shaft Lubrication: Oil splash system, both ends For elevated pressure applications, 57/81 series and 64/67 series are available with high pressure sealing and testing to allow discharge pressures as high as 100 PSIG (15 PSI maximum pressure boost)* * Blowers operating with a discharge pressure above 20 PSIG require mechanical rotor shaft sealing; above 25 PSIG requires hydrostatic testing and special high pressure seal leakage testing. All PD Plus blowers are factory tested to meet ISO 9001 registered quality standards. Rotors are dynamically balanced to meet ISO1940 Grade 6.3 specifications.

カタログの1ページ目を開く
PD Plus 3200 TH-048 - 2

Performance Tables In conjunction with our program of continuous testing and design upgrading, all specifications are subject to change without notice. All data are approximate. Request a quotation for your specific application. Pressure (14.70 PSIA and 70° F Inlet) BLOWER SPEED MODEL (RPM) Series 46/81 (Vertical Flow) Series 17/57 (Horizontal Flow) A MODEL SERIES ALTERNATE DRIVE SHAFT LOCATION Values are approximate and should not be used for construction. Certain dimensions for 64/67 double envelope gas-service differ slightly from those shown above. Certified prints are available through...

カタログの2ページ目を開く

Tuthillのすべてのカタログと技術パンフレット

  1. HD Series Pumps

    39 ページ

  2. 4000 Series Pumps

    18 ページ

  3. D Series Pump

    3 ページ

  4. L & C SERIES

    6 ページ

  5. Heavy Duty Series

    6 ページ

  6. 1000 SERIES

    6 ページ

  7. TI850 TH-063

    2 ページ

  8. QX TH-094

    2 ページ

  9. PneuPak TH-056

    2 ページ

  10. PneuMax II TH-055

    2 ページ

  11. TuffSeall

    2 ページ

  12. M Series

    2 ページ

  13. HD Series

    6 ページ

  14. Full Line

    6 ページ

  15. atlantic fluidics

    16 ページ

  16. KTLP/VFP Series

    2 ページ

  17. Process Gear pumps

    6 ページ

  18. T950H Brochure

    4 ページ

カタログアーカイブ

  1. Series 1000

    6 ページ