TLP100
1 / 6ページ

カタログの抜粋

INCLINATION SENSOR MEMS technology with High resolution MEMS technology Simple selection and fast installation High protection level IP67 and wide temperature range from -40°C ... +85°C High accuracy at economic prices Stable accuracy over whole temperature range Resolution up to 0,01° Single axis 0° to 360° Double axes ± 1° to ± 60° Optional redundant output Long service life for outdoor applications Cost, space and installation work saving High shock resistance Different output types (analog, CANopen, TTL output) Customized solution on request The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. - Via del Lavoro Artigiano 13/15, 25032 Chiari (BS) - ITALY - P.IVA/C.F: IT03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.

カタログの1ページ目を開く

INCLINATION SENSOR MEMS technology with High resolution PRODUCT DESCRIPTION TLP100 is available with one or two measurement axes. The inclinometer working principle is based on a micro machined silicon capacitive transductor (developed with MEMS technology). High performance, high IP rating, resistance to shock and vibrations, and high electromagnetic compatibility make this sensor suitable for mobile hydraulics applications. Typical application are cranes, aerial platforms, drilling machines and excavators. Various sensor enclosure designs open possibilities for many different types of...

カタログの2ページ目を開く

INCLINATION SENSOR MEMS technology with High resolution TECHNICAL SPECIFICATION OPERATING PRINCIPLE Measuring range ±1° to ±60° for horizontal version 0° to 360° for vertical version Horizontal Vertical Temp. range compensation Temperature coefficient Temperature range Material housing approx. 225 g [7.93 oz] version with 1x M12, 5-pin flange connector Shock resistance Vibration resistance Operating principle MEMS (acronym for Micro Electro Mechanical Systems) technology enables both electronic circuits and opto-mechanical devices to incorporate on the same silicon substrate, using...

カタログの3ページ目を開く

INCLINATION SENSOR MEMS technology with High resolution DIRECTION AXES Dual axes The 2-dimensional inclination sensor must be mounted with the base plate in horizontal position, i.e. parallel to the horizontal line. The sensor can be inclined both towards the X and Y axis at the same time. For each axis a separate measured value is provided. Single axis TSM single axis TLP100 inclination sensor The 1-dimensional inclination sensor must be installed with its Z-axis in line with the force of gravity, as illustrated below. The 1-dimensional sensor defaul t position is 0° as shown in the...

カタログの4ページ目を開く

INCLINATION SENSOR MEMS technology with High resolution The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. - Via del Lavoro Artigiano 13/15, 25032 Chiari (BS) - ITALY - P.IVA/C.F: IT03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

カタログの5ページ目を開く