カタログ >
TSM SENSORS SRL >
TLK100 TILT SWITCH

TLK100 TILT SWITCH
1 / 6ページ

カタログの抜粋

TILT SWITCH MEMS technology switching output inclinometer MEMS technology High protection level and wide temperature range High temperature stability Resolution up to 0.01° Single axis range ±180° or 0 ... 360° Dual axis range up to ± 60° Rugged housing High accuracy Reliability and long service life for outdoor applications Easy installation and cost saving Designed for harsh enviromental conditions Relay, NPN or PNP output High protection level MEMS sensors technology Wide range temperature Reverse polarity protection The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d'Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

カタログの1ページ目を開く

TILT SWITCH MEMS technology switching output inclinometer PRODUCT DESCRIPTION A tilt switch is a switching output inclinometer that toggles the output status when the tilt value exceeds the pre-set threshold. TLK100 is the new family of tilt sensors, based on MEMS technology, capable of working in extreme conditions and hard environments, subjected to sharp movements, shocks and high vibrations. Thanks to the high protection class, the sensor is perfectly suited for use in humid or polluted conditions, furthermore, the compact and flat design well-fit the tight installation spaces. The...

カタログの2ページ目を開く

MEMS technology switching output inclinometer PRODUCT CODE ORDER CODE O r-o Power supply range Axis type O a = Dual axis (floor mounting) V •< = Single axis - unipolar (wall mounting) VI a = Single axis - bipolar (wall mounting) Output type = lx Open collector NPN = lx Open collector PNP a = Male connector M12x5, PUR cable 30cm a = Male flange connector M12, 5-pin a = Wire connector 5 poles 300 mm Switching points type Switching points thresholds aalbbD * = Threshold values are defined with the following coding rule: "aa” is the integer part of the value "bb” is the decimal part. The dash...

カタログの3ページ目を開く

TLK100TILT SWITCH MEMS technology switching output inclinometer ELECTRICAL CHARACTERISTICS MEMS, or Micro Electro-Mechanical System, is a chip-based technology where sensors are composed of proof masses sprung between capacitive plates. Each mass act like a moving plate of a variable capacitor formed by an array of interlaced 'fingers'. When the sensor is tilted, the mass moves changing the distance between the plates and therefore the capacitance. By measuring the capacitance variation the angle value can be detected. NPN / PNP ELECTRICAL CONNECTION M12 X 5 PINS SINGLE RELAY ELECTRICAL...

カタログの4ページ目を開く

TILT SWITCH MEMS technology switching output inclinometer COUNTING DIRECTION Dual axis The 2-dimensional tilt sensor must be mounted with the base plate in horizontal position, i.e. parallel to the horizontal line. The sensor can be tilted to both the X and Y axes at the same time. A separate measure is provided for each axis. TLK100 dual axis inclinometer Single axis TLK100 single axis inclinometer The 1-dimensional tilt sensor must be installed with the base plate in vertical position, i.e. Z-axis perpendicular to the force of gravity. The default “zero point” position is the one shown in...

カタログの5ページ目を開く

TILT SWITCH MEMS technology switching output inclinometer The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d’Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

カタログの6ページ目を開く