カタログ >
TSM Control Systems >
TSM Extrusion Control

TSM Extrusion Control
1 / 2ページ

カタログの抜粋

To enable instantaneous changes in throughput, the TSM Gravimetric Blenders continuously monitor and control extruder throughput (lb/hr or kg/hr) and can also be used to optimise yield (weight per length control). The system will also provide Roll, Order and Shift summaries by component, allowing precise calculation of material costs, profit margins per customer order etc. Operation: > Extrusion control means tighter tolerances, allowing down-gauging and increased line speeds. Higher yields of 2 - 3% are readily available. Extrusion control allows you to run at minimum thickness measurement values while maximizing consistency. - Kilograms per Hour - Grams per Meter - Grams per Meter square - Microns - Roll Weight / Roll Length As part of job recipe entry, the defined extrusion / haul-off control set points are entered in the remote operator panel. If a Co-Extrusion line is in use, the individual layer percentage information is entered on the TSM CP2000 for automatic multi- layer control. The TSM control monitors the line speed and extruder output to guarantee on-spec consistent output quality, thus reducing waste considerably. > - Mounted directly on the extruder - Eliminates height problems and the expense of a secondary weigh hopper - The system employs adaptive control and monitoring software that controls the extruder screw speed or line speed - The unique TSM algorithms provide automatic compensation for bulk density variations (including regrind) allowing material to be extruded at the lowest set points - The system can respond instantly to changes in haul-off speed or execute new set point entrys via a proprietary TSM ґstart up software routine >

カタログの1ページ目を開く

TSM offer a dedicated web server and Ethernet interface as part of each blender. This option allows access to each System via a factory network (Intranet) or the Internet. Thus, blenders can be monitored, analyzed and problems diagnosed from anywhere on the globe (SERVICE) or from any PC connected to the factory Intranet (PRODUCTION). > Օ Tel: +353-42 9335560 Fax: +353-42-9334422 Օ Tel: +1-770-8866630 Fax: +1-770-8862395 Օ E-mail: info@tsm-controls.com Website: www.tsmcontrols.com > TSM Reserve the right to change product specifications at any time without prior notice size="-1">

カタログの2ページ目を開く