カタログ >
TOPWAY LCD >
HMT043ATA-4C

HMT043ATA-4C
1 / 11ページ

お気に入りに追加する　

カタログの抜粋

HMT043ATA-4C LCD Module User Manual Release Date - Preliminary Draft release Document Name: HMT043ATA-4C Page: 1 of 10

カタログの1ページ目を開く

LCD Module User Manual Document Name: HMT043ATA-4C Page: 2 of 10

カタログの2ページ目を開く

LCD Module User Manual 1 Basic Specification TOPWAY HMT043ATA-4C is a Smart TFT Module with 32bit MCU on board. Its graphics engine provides numbers of outstanding features. It supports TOPWAY TML 3.0(Editor 2017) for preload and pre-design display interface that simplify the host operation and development time. Suitable for industry control, instrumentation, medical electronics, power electric equipment applications. General Specification Screen Size(Diagonal) : Resolution : Color Depth : Pixel Configuration : Display Mode : Viewing Direction : Outline Dimension : Active Area : Backlight :...

カタログの3ページ目を開く

LCD Module User Manual Terminal Function UART Interface Terminal (K1) Descriptions Power supply Data Input Data output Request To Send (function as busy BUSY signal) 1：Busy；0：No busy NO Connect, leave open Ground, (0V) Note. *1. User data and commands transfer through this terminal *2. HW hand shake is suggested Power output USB DATA negative signal USB DATA positive signal No connection, leave open Ground, (0V) Note. *1. TML files and image files preload through this terminal Document Name: HMT043ATA-4C Page: 4 of

カタログの4ページ目を開く

LCD Module User Manual 2 Absolute Maximum Ratings Items Power Supply voltage Operating Temperature Storage Temperature Condition No Condensation No Condensation Note: *1. This rating applies to all parts of the module and should not be exceeded. *2. The operating temperature only guarantees operation of the circuit. The contrast, response speed, and the other specification related to electro-optical display quality is determined at the room temperature, TOP=25℃ *3. Ambient temperature when the backlight is lit (reference value) *4. Any Stresses exceeding the Absolute Maximum Ratings may...

カタログの5ページ目を開く

LCD Module User Manual Basic Operation Function Descriptions HMT043ATA-4C TML files Picture files ICONS files UART interface Custom Memories Touch Panel VP variables Control and Draw Engine TML files, Picture files, ICON files are stored inside FLASH memory area. They are preloaded to HMT043ATA-4C for stand alone interface use. Those files are preloaded via USB interface as an USB drive. All the interface flow and the touch response are based on the preloaded TML files VP variables memory is inside RAM area, it provides real time access via UART by the HOST or display onto the TFT by TML...

カタログの6ページ目を開く

LCD Module User Manual Quick Start Guide Install TOPWAY Graphics Editor Import pictures 2. design UI flow Connect to host Show 5. real time data 4.3 Command Descriptions Please refer to “SMART LCD Command Manual”. Document Name: HMT043ATA-4C Page: 7 of 1

カタログの7ページ目を開く

LCD Module User Manual 5 Optical Characteristics Item View Angles Contrast Ratio Response Time TOFF White Blue Uniformity NTSC Luminance 1.IF= 40 mA, and the ambient temperature is 25℃. 2. The test systems refer to Note 1 and Note 2.

カタログの8ページ目を開く

LCD Module User Manual Note 1: The data are measured after LEDs are turned on for 5 minutes. LCM displays full white. The brightness is the average value of 9 measured spots. Measurement equipment SR-3A (1°) Measuring condition: - Measuring surroundings: Dark room - Measuring temperature: Ta=25℃. - Adjust operating voltage to get optimum contrast at the center of the display. Note 3: The definition of contrast ratio (Test LCM using SR-3A (1°)): Luminance When LCD is at “White” state Contrast = Ratio(CR) Luminance When LCD is at “Black” state (Contrast Ratio is measured in optimum common...

カタログの9ページ目を開く

LCD Module User Manual 6 Precautions of using LCD Modules Please refer to "LCD-Module-Design-Handling-Precaution.pdf". Document Name: HMT043ATA-4C Page: 10 of 10

カタログの10ページ目を開く

HMT043ATA-4C 1 / 11ページ

カタログの抜粋

TOPWAY LCDのすべてのカタログと技術パンフレット

HMT043ATA-4C
1 / 11ページ