MT26 MICROTRENCHER
1 / 2ページ

カタログの抜粋

SUPERIOR SYSTEM Make clean trenches from 1.5-in to 3-in wide (76.2-mm) and Part of a complete microtrenching system that includes 26-in (660.4-mm) deep in one easy pass with a standard the RT80 ride-on tractor and HX75 vacuum excavator, the MT26 hydraulic trench cleaner, lowering your cost per foot. was designed based on direct operator feedback and jobsite demands. EFFICIENT CUT Equipped with a standard hydraulic plunge, the MT26 eliminates the need for manual adjustment by providing Get better performance with the MT26 hydraulic accumulators infinite variable depth control from 0 to 26 inches. which maintain constant down pressure on the saw for the cleanest cut possible. DURABLE BLADES The MT26 can be equipped with a wide variety of unique blades from standard carbide-tipped blades to Ditch Witch- The demands of every jobsite are different—which is why the exclusive PDC blades with diamond embedded carbide. MT26 comes standard with a saw swing, slide, lift, level, tilt and trench cleaners. Optional vac ports and spoil chutes available.

カタログの1ページ目を開く

Trench depth Blade diameter Attachment height, transport Length, transport, from centerline of rear axle Working length, from centerline of rear axle Centerline saw to centerline unit, min Trench width Centerline unit to outside left tire (31x10 solid tires) Centerline unit to end of traverse frame Width, transport Attachment weight Blade speed, variable Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not match that described. ©2021 The Charles...

カタログの2ページ目を開く