カタログ >
The Charles Machine Works, Inc >
FM5X FLUID MANAGEMENT

FM5X FLUID MANAGEMENT
1 / 2ページ

カタログの抜粋

FM5X FLUID MANAGEMENT SYSTEM Powered by a 5-hp Honda engine with a standard A new wet hopper design, increasing the venturi inlet from 1.25 to 2 inches—a 60 percent larger opening for material to match the needs of smaller diameter, short-distance flow and superior fluid mixing. Steep sides incorporated in utility installation jobs. design to help speed mixing cycles. Flexible pump mounting offers a variety of setup FM5X features a narrow-tank design, allowing the unit to configurations to meet the needs of small-diameter easily be positioned side-by-side with a drill unit on a trailer for easy jobsite transportation and reduced jobsite costs. Features a high-performance Flomax pump, delivering Features powder-coated finish, making the unit more 160-gpm (606-l/min) of flow, and operates up to 10 percent durable, economical and resistant to chips, rusting more efficiently than previous models. FLUID MANAGEMENT SYSTE

カタログの1ページ目を開く

DIMENSIONS U.S. Weight, full of water 3,164 lb FLUID/MIXING SYSTEM Centrifugal pumps Suction port diameter 2 in Discharge port diameter 2 in Pump discharge rate, water, max 160 gpm Drilling fluid tank capacity 300 gal Solids addition rate 50 lb/min Mixing hopper capacity 1 ft3 Fuel Gasoline Cooling medium Air Manufacturer's net power rating 4.8 hp 3.6 kW Emissions compliance EPA Phase 3 EU Stage lV FLUID CAPACITIES Fuel tank 0.95 gal 3.6 L NOISE LEVEL Sound pressure 91 dbA per IS06394 Specifications are general and subject to change...

カタログの2ページ目を開く