カタログ >
Tecnotion >
Vacuum-ULV G2 series

Vacuum-ULV G2 series
1 / 2ページ

カタログの抜粋

ULV - G2 ironless vacuum series Parameter Winding type Motortype, max voltage ph-ph ULV9 G2 coil unit in 126mm magnet yokes Peak force @ 20°C/s increase Continuous force passive cooled* Continuous force active cooled** Maximum speed*** Peak current Max. cont. current passive cooled* coils @ Tmax Max. cont. current active cooled** Motor force constant Motor constant coils @ Tmax Electrical time constant Maximum continuous power loss Maximum coil temperature Thermal resistance Thermal time constant* Temperature cut-off / sensor Explanation of name U = Ironless LV = Series type/vacuum 9 = Number of coils N / S = Winding type Coil unit length Coil unit weight Motor attraction force Lead wire type (Power, 4x) ULV G2 Lead wire weight Lead wire type (Sensor, 4x) * Depends on environmental conditions in the application. Continuous force noted has been determined with a typical thermal resistance value for passive cooling, and a vacuum chamber wall of 40°C. ** Depends on environmental conditions in the application. Continuous force noted has been determined with a thermal resistance of 0.02 K/W and a mounting surface of 20°C when the motor is driven at max. continuous current. *** Actual values depend on bus voltage.

カタログの1ページ目を開く

Magnet yokes 9.2 (6.0 deep) MAGNET YOKE 420mm MAGNET YOKE 420mm MAGNET YOKE 126mm Hole 3 (2x) For Dowelpin DIN7 Ø3h8 (Optional use) Hole 3 (2x) For Dowelpin DIN7 Ø3h8 (Optional use) For Dowelpin Coil units DIN7 Ø3h8 (Optional use) COIL UNIT ULV9 ULV Magnet yoke dimensions 28 Magnet yokes can be butted together. Mounting instructions and flatness or parallelism requirements can be found in the Ironless installation manual. 3D CAD files can be downloaded from our website.

カタログの2ページ目を開く