UL SERIES
1 / 2ページ

お気に入りに追加する　

{{requestButtons}}

カタログの抜粋

UL Series ironless Parameter Winding type Motortype, max voltage ph-ph 3-phase synchronous ironless, 230Vac rms (325Vdc) magnet @ 25°C Continuous force* Maximum speed** Motor force constant UL3 in 210mm magnet yoke shown Peak force @ 20°C/s increase Peak current Maximum continuous current Motor constant Back EMF phase-phase peak Resistance per phase* Maximum continuous power loss Electrical time constant* Thermal resistance Thermal time constant* Temperature cut-off / sensor Coil unit weight 126 Magnet yokes can be butted together. Coil unit length Magnet yoke dimensions Motor attraction force Cable mass Cable type (power) 4022 363 2034 - Ver. 2.2 Cable type (sensor) * These values are only applicable when the mounting surface is at 20°C and the motor is driven at maximum continuous current. If these values differ in your application, please check our simulation tool. ** Actual values depend on bus voltage. Please check the F/v diagram in our

カタログの1ページ目を開く

Magnet yokes Coil units 8.2 Coil unit Power cable O 4.3 Thermal sensor cable MAGNET YOKES Hole O3 (2x) For Dowelpin DIN7 O3h8 (Optional use) Optional: Digital Hall Module Mounting instructions and flatness or parallelism requirements can be found in the ironless installation manual. CAD files and 3D models can be downloaded from our website. ©2022 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.

カタログの2ページ目を開く

Tecnotionのすべてのカタログと技術パンフレット

1. 

   Torque motors in Delta robots

   2 ページ

2. 

   Linear motors in Digital cutting applications

   2 ページ

3. 

   TS Iron core series

   2 ページ

4. 

   QTR High stacks Torque leaflet

   2 ページ

5. 

   TxX ironcore leaflet

   2 ページ

6. 

   Motor portfolio

   6 ページ

7. 

   Vacuum Gen 2 V1.4

   16 ページ

8. 

   Frameless torque motor brochures V2-3

   36 ページ

9. 

   Iron core linear motor brochure_v1-1

   36 ページ

10. 

    Ironless linear motor brochure

    28 ページ

11. 

    Vacuum-UXXV G2 series

    2 ページ

12. 

    Vacuum-ULV G2 series

    2 ページ

13. 

    Vacuum-UMV G2 series

    2 ページ

14. 

    QTL 485 Torque motors

    2 ページ

15. 

    QTL 385 Torque motors

    2 ページ

16. 

    QTL 310 Torque motors

    2 ページ

17. 

    QTL 290 Torque motors

    2 ページ

18. 

    QTL 230 Torque motors

    2 ページ

19. 

    QTL 210 Torque motors

    2 ページ

20. 

    QTR 160 Torque motors

    2 ページ

21. 

    QTR 133 Torque motors

    2 ページ

22. 

    QTR 105 Torque motors

    2 ページ

23. 

    QTR 78 Torque motors

    2 ページ

24. 

    QTR 65 torque series

    2 ページ

25. 

    UXX SERIES

    2 ページ

26. 

    UXA SERIES

    2 ページ

27. 

    UF SERIES

    2 ページ

28. 

    UC SERIES

    2 ページ

29. 

    UM SERIES

    2 ページ

30. 

    TBW serie

    2 ページ

31. 

    TB series

    2 ページ

32. 

    TL Series

    2 ページ

33. 

    TM series 2.2

    2 ページ

34. 

    TL48

    2 ページ

35. 

    Simulation tool

    2 ページ

36. 

    transport conveyer

    5 ページ

37. 

    Low voltage

    2 ページ