カタログ >
TAKACHI Electronics Enclosure Co., Ltd. >
TCS - series

TCS - series
1 / 29ページ

カタログの抜粋

SIMPLE ALUMINIUM SHEET METAL BOX with COVER 6 Additional Sizes Low-cost lineup of chassis cases released! Customizable Sizes Expanded CUSTOM SIZED ALUMINIUM BOX CUSTOM SIZED STAINLESS STEEL BOX CASE BOX RACK & CUSTOM TAKACHI ELECTRONICS ENCLOSURE CO., LTD.

カタログの1ページ目を開く

CUSTOM SIZED STAINLESS STEEL BOX Conductive 3 ■ Adjustable sizes available in 1mm intervals, with W and D dimensions from 60 ~ 400mm, and H dimension from 20 ~ 120mm. ■ Detachable top cover allows easy assembly and maintenance access. ■ Made of stainless steel (SUS304) for superior weather and corrosion resistance. ■ Stainless steel (SUS304) allows the enclosure to be conductive. ■ Best suited for the instruments located in medical facilities, food plant, or clean room. Part name Screw (M3-5 truss head) Bright annealed Bright annealed Stainless steel ■ Cover and Base are covered with a...

カタログの2ページ目を開く

To select W, H and D dimensions in 1mm intervals. W 60 ~ 400mm D 60 ~ 400mm Caution : Not all size combinations are possible. Refer to the chart on page TCS-3 for further details. The width of the folded base part will differ depending on W and D dimensions. See page TCS-3 ~ 4 for further details. To determine a product number, fill W, H and D in the following blank boxes. Lead Time Order Inquiry Custom Size Only Custom Size + Hole Milling 7 business days (1 ~ 3 pcs) 8 business days (1 ~ 3 pcs) For more information, contact us here at sales@takachi-el.co.jp Accessories (Optional parts)...

カタログの3ページ目を開く

TCS 標準価格表（税別） Size Table Refer to the table below for available dimensions. W and D = 200mm or smaller : Folded area width = W8.5mm, D5.5mm W or D = 201mm or larger : Folded area width = W10.0mm, D10.0mm See TCS dimensions on page TCS-4 for further details.

カタログの4ページ目を開く

■ DXF/DWG/PDF drawings available on our website. Number of screws *Note: An additional set of screw holes (on each corresponding side) will be required for assembly if W or D dimension is 301mm or larger. Values within ( ) are for W / D dimensions of 200 mm or smaller. CUSTOMIZED EXAMPLE LASER CUTTING Lead Time : 8 business days LASER CUTTING + INKJET PRINTING Lead Time : 11 business days

カタログの5ページ目を開く

CUSTOM SIZED ALUMINIUM BOX ■ Adjustable sizes available in 1mm intervals, with W and D dimensions from 60 ~ 400mm, and H dimension from 20 ~ 120mm. ■ Detachable top cover allows easy assembly and maintenance access. ■ Internal surface of the sheet aluminium is unfinished, making conductive and grounding possible. Part name Cover Screw (M3-5 truss head) Color / Finish Metallic silver / painted (conductive inside) Metallic silver / painted (conductive inside) ■ Cover and Base are covered with a protection film on one side.

カタログの6ページ目を開く

To select W, H and D dimensions in 1mm intervals. Caution : Not all size combinations are possible. Refer to the table on page TCF-3 for further details. The width of the folded base part will differ depending on W and D dimensions. See page TCF-3 ~ 4 for further details. To determine a product number, fill W, H and D in the following blank boxes. Lead Time Order Inquiry Custom Size Only Custom Size + Hole Milling 7 business days (1 ~ 3 pcs) 8 business days (1 ~ 3 pcs) For more information, contact us here at sales@takachi-el.co.jp Accessories (Optional parts) Rubber feet B series See page...

カタログの7ページ目を開く

TCF 標準価格表（税別） Size Table Refer to the table below for available dimensions. W and D = 200mm or smaller : Folded area width = W8.5mm, D5.5mm W or D = 201mm or larger : Folded area width = W10.0mm, D10.0mm See TCF dimensions on page TCF-4 for further details.

カタログの8ページ目を開く

■ DXF/DWG/PDF drawings available on our website. *Note: An additional set of screw holes (on each corresponding side) will be required for assembly if W or D dimension is 301mm or larger. Values within ( ) are for W / D dimensions of 200 mm or smaller. APPLICATION EXAMPLE Terminal Box Switch Box Tube Amplifier Command Panel

カタログの9ページ目を開く

ALUMINIUM SHEET METAL BOX with COVER ■ Simple aluminium sheet metal box with an aluminium sheet cover. ■ Internal surface of the sheet aluminium is unfinished, making conductive and grounding possible. ■ Detachable top cover allows easy assembly and maintenance access. ■ 6 additional sizes added. Total of 12 different sizes are available. ■ Custom size, TCF series is available. ■ Unique jointing techniques allow for sufficient strength without the need for welding. Part name Cover Screw (M3-5 truss head) Color / Finish Metallic silver / painted (conductive inside) Metallic silver / painted...

カタログの10ページ目を開く

■ DXF/DWG/PDF/STP drawings available on our website. W APPLICATION EXAMPLE : Controller ※Only applicable to T30-7-18 model. Product no. / Dimensions Product no. Accessories (Optional parts) Rubber feet B series See page Feet-1 APPLICATION EXAMPLE : Switch Box Insert nut adhesive standoff AST series See page 121

カタログの11ページ目を開く

■ Detailed DXF/DWG/PDF drawings available online. ■ Plated Through Holes (PTH) type PCB with a 2.54mm hole-to-hole pitch. Inexpensive and economical PCB made using robust, heat-resistant and non-conductive glass epoxy. ■ Easily mounted onto bosses or standoffs via the mounting holes at each corner. ■ Environmentally friendly lead-free solder. RoHS3 compliant. ■ 5 different sizes available, with PCB100-160 being of Eurocard (3U) format size. Accessories (Optional parts) Adhesive standoff AST series See page AST-1 Adhesive standoff ASR series See page ASR-1 Material / Finish : Glass epoxy...

カタログの12ページ目を開く

■ Material / Finish : Glass epoxy (FR-4) / Through-hole - Lead-free solder resist ■ Environmentally friendly lead-free solder. ■ 25 different sizes available. See chart on page TNF-2 for suitable cases/boxes. ■ TNF160-240 is for multi-size use. Cut it to fit your needs when using. Accessories (Optional parts) Tapping standoff TPS series See page TPS • MT-1 Adhesive standoff T-600, 700 series See page Standoff-1 Adhesive standoff ASR series See page Standoff-1 PCB mounting screw EM series See page EM

カタログの13ページ目を開く

■ Pattern B, C, and E PCBs come with holes for boss mounting. Product no. / Dimensions Product no.

カタログの14ページ目を開く

Accessories (Optional parts) TAPPING STANDOFF ■ DXF/DWG/PDF drawings available on our website. ■ Tapping screw head allows for easy installation onto existing enclosure boss mount. ■ 4 different sizes available : M2.3, M2.6, M3 and M4 size. ■ Material / Finish : Brass / Unfinished Suitable models WH series • PFE series LC • LCE • LCS • LCT series PF • PFF series (M2.3 boss models) TW • TWN • TWF series (M2.3 boss models) WP series (M2.3 boss models) PF • PFF series (M2.6 boss models) WP series (M2.6 boss models) TWS • TW • TWN • TWF series (M3 boss models) BCAP • BCPC • BCPK • BCAR • BCPR...

カタログの15ページ目を開く