SOAT Interface Pushbuttons
1 / 6ページ

Max current with resistive load : Plastic body, momentary : 400mA @ 32Vac • 100mA @50 Vdc • 125mA @ 125 Vac Metal body, momentary : 500mA @ 48 Vac • 200mA @ 50 Vdc • 200mA @ 250 Vac Plastic body, latched : 2A @ 125 Vac • 100mA @ 24Vdc Electrical lifecycle : Momentary : 500.000 cycles at full load Latched : 200.000 cycles (100mA) • 10.000 cycles (2A) Contact type : NO or NC Initial contact resistance : 50mΩ max Insulation resistance : 1 GΩ mini, DC500V Dielectric strengh : Plastic body 1000 Vac rms • Metal body 1500 Vac rms LED typical power supply (@20mA) : see Build Your Part Number section LED typical lifecycle : 40.000 hours ☼ ENVIRONMENTAL SPECIFICATIONS Operating temperature : -30°C to +85°C Ingress protection : IP67 (SOAT12) • IP68 (SOAT68) Compliant with IEC60947-5-1 MECHANICAL SPECIFICATIONS Actuation force : from 2 to 5 Newtons Travel : 1.5 mm Contact bounce : 10ms Mechanical lifecycle : 1.000.000 cycles Materials : Contact base : P.C. Contact : gold plated silver Body : diallyl phthalate (DAP UL94v0) • Zinc-Alloy Key : polyamid 6/6 (PA66) Solder terminals : gold plated copper Wires : stranded AWG20, 0.6mm2 UL approved Torque applied to nut : Plastic body : 0.5Nm Metal body : 1.5Nm GENERAL SPECIFICATIONS Typical installation size : 13.6 mm Panel thickness : Snap-in Y1 body : 0.8 mm ~ 1.8 mm Snap-in Y2 body : 3 mm, ±0.25mm Threaded body: 1.5 mm ~ 4 mm Soldering profile : 300°C max. during 5 seconds max. SOAT SERIES - MINIATURE PUSHBUTTON SWITCHES • DIA.13.6 MM • NO~NC

miniature pushbutton switches • dia. 13.6mm TYPE - INGRESS PROTECTION BODY VERSION Round Square Threaded Threaded Material Black Zinc Alloy Chromed Zinc Alloy Satin Zinc Alloy CONTACT TYPE / FUNCTION Velour Zinc Alloy KEY VERSION CONNECTION Material domed mate high mate ABOUT THIS RANGE Illumination only available for IP67 version with flat button. NO Latched version only available with plastic body. 3 Wire leads versions fully customisable on request. 1 2 Our pushbuttons are supplied with their hex nut and washer. SOME CONFIGURATIONS MIGHT NOT BE AVAILABLE OR SUBMITTED TO M.O.Q. Solder...

miniature pushbutton switches • dia. 13.6mm BUILD YOUR PART NUMBER - DETAILS Snap’in 1 Plastic DAP (round) Snap’in 2 Plastic DAP (round) Threaded, round Threaded, squared BUTTON VERSIONS Flat button Domed button High round button only available with bodies D, P, S, S2 only available with bodies D, P Solder Terminals White cylinder(White) Wire,Red(LED +) Wire,Green(LED–) EPOXY Multi-wire lead AWG20,section 0.6mm²,UL approved. (Black / Green /

miniature pushbuttons • Ø13.6mm • illumination SOAT12DKJ PA66 button, Zinc alloy body, solder terminals SOAT12Y1BJ PA66 button, plastic snap’in 1 body , solder terminals SOAT12Y2RJ PA66 button, plastic snap’in 2 body , solder terminals SOAT12D2KJ PA66 button, Zinc alloy body, solder ter

miniature pushbutton switches • dia. 13.6mm ILLUMINATED - NO SOAT12DKDJ• PA66 button, Zinc alloy body, momentary, solder terminals • please select LED color in Build Your Part Number section SOAT12D2KDJ• PA66 button, Zinc alloy body, momentary, solder terminals • please select LED color in Build Your Part Number section SOAT12Y2KDJ• PA66 black button, snap’in 2 PA black body, momentary, solder terminals • please select LED color in Build Your Part Number section SOAT12PRDZJ• PA66 red button, PA black body, alternate solder terminals • please select LED color in Build Your Pa

miniature pushbutton switches • dia. 13.6mm FULLY SEALED WIRE LEADS - NO - MOMENTARY SOAT12PKDF1• PA66 button, plastic body , 500mm wires • please select LED color in Build Your Part Number section SOAT12PGF1 touche en PA66, corps PA noir, sortie fils 500mm custom designed harness on a SOAT12D13WF add this extra silicon cap to bring ingress protection grade up to IP68