カタログ >
STANLEY Engineered Fastening >
PULL-THRU (PT) RIVET DATA SHEET

PULL-THRU (PT) RIVET DATA SHEET
1 / 2ページ

カタログの抜粋

Pull-Thru (PT) Rivets Ideal where clearance is limited and a flush set is required on both sides of the application. The POP® Pull-Thru (PT) rivet is a steel countersunk blind fastener designed to set surface flush on both sides of an application (blind side rivet protrusion # 0.4mm/.015"). During setting, the mandrel head never breaks away from the mandrel. It remains integral with the mandrel, while extruding completely through the rivet body and exiting into the setting tool. This unique process provides a consistent tight radial set within the working grip range of the rivet, improves rivet tool access and eliminates the possibility of loose mandrel heads in the application. This innovative fastener is widely used in the electronics industry. It also lends itself to assembly of any product where clearance is limited and protrusion of the rivet body from application surfaces must be either minimized or eliminated. The mandrels of the POP Pull-Thru rivets have been color coded for easy differentiation on the production floor. ® The POP® Pull-Thru rivets are manufactured to ISO, QS and TS requirements and are both RoHS and DFAR compliant. PT rivet delivers the “double flush” set required in a server blade assembly providing minimal to zero protrusion between the sliding components. POP Rivet Presenter speeds up assembly process and improves productivity. Features & Benefits: • Patented Double Flush Set Flush Set on both sides for double countersunk materials ■ Insertion can be reversed improving rivet tool access ■ • Unique “Pull-Thru ” Mandrel No mandrel heads remain anywhere in the application ■ Consistent clamp force ■ Tight radial set provides increased structural rigidity ■ • High Speed Automation ■ POP Rivet Presenter facilitates a cycle time as fast as 2 seconds. Quick visual identification of different part sizes

カタログの1ページ目を開く

(L) (F) Nominal Nominal Nominal Rivet Blind Rivet Body Side Diameter Length Protrusion In. (mm) Rivet Part Number Grip Range (W) Nominal Mandrel Diameter In. (mm) Nominal Shear Strength Lbs. (N) Nominal Tensile Strength Lbs. (N) Note: See Customer Print for application design details. Mandrels are colored to help distinguish rivet sizes RIVET SETTING SEQUENCE 2. Mandrel head enters and flares rivet body 3. Mandrel head compresses and extrudes thru rivet body TOOL SELECTION GUIDE Rivet Diameter Note: Contact us for more information on high-speed fastening solutions. 4. Cross section of set...

カタログの2ページ目を開く