カタログ >
Stanhope-Seta >
Seta Existent Gum Solid Bath

Seta Existent Gum Solid Bath
1 / 1ページ

カタログの抜粋

Seta Existent Gum Solid Bath Existent Gum Content in Fuels ASTM D381; IP 131; IP 540; BS EN ISO 6246; DIN 51 784 ∞ 5 test stations ∞ Suitable for air and steam or air only operation ∞ Integral steam superheater (12200-3 only) ∞ Digital temperature control ∞ Flow gauge calibrated for air and steam A Solid Block Bath designed to carry out up to five simultaneous tests for determining existent gum content in fuels by the Jet Evaporation method. Existent Gum Solid Block Bath - Air and Steam Existent Gum Solid Block Bath - Air only Specifications: Temperature range: Heaters: Operational requirement: Over temperature cut out: Air/steam inlet: Size (HxWxD) / Weight: 140 to 260 °C ( ±0.5 °C) (284 to 500 °F) Integral steam superheater Steam generator or rotary compressor Rotary compressor The unit comprises a solid block bath with integral steam superheater, removable taper-fit conical steam/ air jet adaptors with copper screens and a steam/air flow control valve and gauge. The bath has five test wells, and a thermometer well. Outlets can be individually checked for uniform flow of air or steam. The bath has a temperature range of 140° to 260 °C, and is controlled by a digital temperature controller which displays both the set temperature and the actual bath temperature measured by a probe. The flow of steam or air is adjusted by an inlet control valve and monitored on a Bourdon gauge calibrated for both air and steam. Stanhope-Seta, London Street, Chertsey, Surrey, KT16 8AP, UK t: +44 (0) 1932 564391 | e: sales@stanhope-seta.co.uk | www.stanh

カタログの1ページ目を開く