Ground Hollow Dowels for Precision Alignment GD100 series
1 / 2ページ

お気に入りに追加する　

{{requestButtons}}

カタログの抜粋

ground hollow dowels Design-in SPIROL’s Series GDI00 Ground Hollow Dowels for Precision Alignment and Substantial Cost Savings. SPIROL Ground Hollow Dowels are designed to be direct replacements for standard Ground Solid Dowels per ISO 8734. They are used where centerline tolerancing and precision alignment are required. Precision ground outside diameters maintain critical alignment within 2Qjum. A 1.6jum surface finish and well-defined chamfers prevent shaving or scraping during installation. The roll-formed design yields substantial cost savings over Solid Dowels. technical specifications standard material The hollow feature offers weight savings over Solid Dowels and clearance for bolts, fluids, or gases. nominal diameter 1 Maximum recommended interference fit for primary retention of Dowel, 2 Recommended transitional fit in mating component. • All dimensions in millimeters, • T refers to strip thickness prior to forming & grinding. • Refer to ISO 286 for dimensional and fit specifications. • Special lengths and sizes available upon request. nominal diameter To Order: GHDL, Nominal Dowel Size x Length, Material, Finish, Series Example: GHDL 8 x 15 FK GD100

カタログの1ページ目を開く

Application Engineering Technical Centres An OEM was using a 16mm OD Ground Solid Dowel to locate the transmission to the back of the engine. This particular application was more demanding than most due to the weight of the two components to be aligned and the method of joining them together. The customer approached SPIROL for cost-reduction suggestions. Europe SPIROL United Kingdom 17 Princewood Road Corby, Northants NN17 4ET United Kingdom Tel. +44 1536 444800 Fax. +44 1536 203415 SPIROL France Cite de I'Automobile ZAC Croix Blandin 18 Rue Lena Bernstein 51100 Reims, France Tel. +33 3 26...

カタログの2ページ目を開く

SPIROLのすべてのカタログと技術パンフレット

1. 

   Threaded Inserts for Plastics Design Guide

   24 ページ

2. 

   How Pre-Assembled Disc Spring Stacks Help Manufacturers Save Time, Money and Ensure Quality

   2 ページ

3. 

   The Benefits of Light Duty Coiled Spring Pins in Soft and Brittle Materials

   3 ページ

4. 

   Factors to Consider When Selecting a Raw Material for Disc Springs

   2 ページ

5. 

   The Difference Between Coiled Spring Pins and Slotted Spring Pins

   4 ページ

6. 

   Alignment Dowels/Bushings

   12 ページ

7. 

   Spacers and Rolled Tubular Components

   12 ページ

8. 

   Series CL8000 & CL8100 Precision Machined Brass Compression Limiters

   2 ページ

9. 

   Series CL6000 & CL6100 Precision Machined Aluminium Compression Limiters

   2 ページ

10. 

    Compression Limiter Design Guide

    20 ページ

11. 

    Slotted Spring Pins

    16 ページ

12. 

    The Benefits of 420 Chrome Stainless Steel Coiled Spring Pins

    2 ページ

13. 

    Model HP - Pneumatic Heat Insert Driver

    2 ページ

14. 

    Model DP - Drilling and Pinning Machine

    2 ページ

15. 

    Model HA - Automatic Heat Insert Driver

    2 ページ

16. 

    Model CR - Semi-Automatic Pin Inserter

    2 ページ

17. 

    Model HM - Manual Heat Insert Driver

    2 ページ

18. 

    Model PM - Manual Pin Inserter

    2 ページ

19. 

    Model PMH - Heavy Duty Manual Pin Inserter

    2 ページ

20. 

    Latch Pins for Plastics

    2 ページ

21. 

    Model PR - Semi-Automatic Pin Inserter

    2 ページ

22. 

    Model PMX - Extra Heavy Duty Manual Pin Inserter

    2 ページ

23. 

    Railroad Nuts - AAR Series

    2 ページ

24. 

    Model CP Pneumatic Compression Limiter Installation Machine

    2 ページ

25. 

    The Advantages of Rolled Tubular Spacers Over Cut Tubing

    2 ページ

26. 

    Series CL220 Split Seam Compression Limiter

    3 ページ

27. 

    The Advantages of CL220 Split Seam Compression Limiters

    2 ページ

28. 

    SPIROL Corporate Brochure

    12 ページ

29. 

    SPIROL Press-N-Lok™ Pins for Plastics

    2 ページ

30. 

    Disc Springs

    20 ページ

31. 

    Coiled Spring Pins

    24 ページ

32. 

    Performance Expectations for Threaded Inserts in Plastic Assemblies

    2 ページ

33. 

    Series RH600 Twist-Lok™ Pins

    2 ページ

34. 

    Model CM - Manual Compression Limiter Installation Machine

    2 ページ

35. 

    How to Select the Proper Spacer for Your Assembly

    2 ページ

36. 

    Cosmestic Pins 550 series

    2 ページ

37. 

    Insert Material – Brass versus Stainless Steel

    3 ページ

38. 

    How to Design the Proper Hole for Heat / Ultrasonic Inserts

    3 ページ

39. 

    Installation Technology

    8 ページ

40. 

    SPIROL Precision Shims

    8 ページ

41. 

    The Difference Between Disc Springs and Belleville Washers

    2 ページ

42. 

    Medical Device Applications

    2 ページ

43. 

    Model CL - Semi-Automatic Compression Limiter Installation Machine

    2 ページ

44. 

    Which Austenitic Stainless Steel Spring Pin is Best for Dynamic Loading?

    3 ページ

45. 

    SPIROL Solid Pins Catalog

    12 ページ

46. 

    High-Performance Solutions for Electric Vehicle Applications

    2 ページ

47. 

    How to Calculate the Estimated Fatigue Life of a Disc Spring

    3 ページ

48. 

    Features and Benefits of ArmorGalv ® Thermal Zinc Diffusion

    3 ページ

49. 

    Pin Driving Chucks SPD, CXA, CXD, CXE

    4 ページ

50. 

    Automotive Applications Flyer

    2 ページ

51. 

    Series 2000 Series 2000

    4 ページ

52. 

    High-Performance Hinge Pins for PC Board Card Locks and Ejector Clip

    2 ページ

53. 

    Lawn and Garden Equipment Applications

    2 ページ

54. 

    Hand and Power Tool Applications

    2 ページ

55. 

    Over-the-Road, Heavy Hauling Applications Flyer

    2 ページ

56. 

    Office Equipment Applications

    2 ページ

57. 

    Heavy Equipment Applications Flyer

    2 ページ

58. 

    Consumer Appliance Applications Flyer

    2 ページ

59. 

    Alternative and Grenn Energy Applications Flyer

    2 ページ

60. 

    Aerospace Applications Flyer

    2 ページ

61. 

    PH series PH series

    2 ページ

62. 

    HC series HC series

    2 ページ

63. 

    Tables Standard

    2 ページ

64. 

    Tables Lift and Roll

    2 ページ

65. 

    SPD, CXA, CXD, CXE CRD

    2 ページ

66. 

    880 Series

    2 ページ

67. 

    How to Design the Optimum Hinge

    2 ページ