カタログの抜粋
Round guiding and clamping elements with adjustable play Works standard SN 02.04 >
カタログの1ページ目を開くProvides the typical high dam-ping performance characteristicfor slideways.Optimum guide play adjustmentpossible for any operating status.Precisely central play restrictionand clamping of the sleeve orcolumn. Low-cost, ready-to-mount guideand clamping bushing.Existing assembling play ensures simple mounting even with largedimensions.Metallic support between clam-ped sleeve and housing affordshigh radial rigidity. > Mounting situation Connection with assembling play between the housing, guide bushing and centre sleeve. Play adjusted Firm fit of the guide bushing in the housing, the guide...
カタログの2ページ目を開くFields of application: > Series FAK-FAL guiding bushes areround linear guiding and clamping elements for all fields of precise mechanical engineering. The use of guiding bushes is called for wherever precise sleeve or column guidance is required and the sleeve/column has to be additionallyprecisely centrally clamped in anyoptional position. This is required,for example,for slee- ves on machine tools in which ab- solute freedom from play at standstill is called after positioning. The se- quence of clamping and release can be repeated as often as required. Benefits: > The simple to produce...
カタログの3ページ目を開くAssembly 1. Insert the guide bushing and ring piston into the housing borehole without exerting force.2. Mount the flange cover looselywithout the shim ring.3. Insert the sleeve. 4. Tighten the clamping screws atthe flange cover evenly crosswise until loss of play is indicated by stiffer sliding action of the sleeve. 5. Precisely gauge the mounting gapfor the shim ring, remove the cover.6. Adjust the high of the shim ring.Recommendation: Measured moun- ting gap + approx. 0.02 mm for contact surface compression. 7. Mount the flange cover and theunderneath shim ring, tighten thescrews...
カタログの6ページ目を開くSPIETH-MASCHINENELEMENTE GmbH & Co KGのすべてのカタログと技術パンフレット
-
catalogue
98 ページ
-
Clamping Nuts
8 ページ
-
Guide Gibs
8 ページ
-
Guide Bushings
16 ページ
-
Clamping Sets
22 ページ
-
Locknut
22 ページ
-
Introduction
11 ページ
カタログアーカイブ
-
Product Range
8 ページ
-
Tension Nut Type AM
8 ページ