カタログ >
Specac Ltd >
Gas cell for pathlength

Gas cell for pathlength
1 / 1ページ

カタログの抜粋

Saecac. Keywords: Pathlength, Concentration, Absorbence, Beer’s Law Choice of Gas Cell for Pathlength/Concentration In order to determine the pathlength of a gas cell for the concentration of gas to be measured, the measured absorbence (A) is related to the concentration of gas (C) by the usual Beer’s Law relationship, Where a is the (frequency dependent) absorption co-efficient, C is usually expressed in parts-per-million (ppm) partial pressure in the atmosphere, and L is the absorbing path, usually expressed in meters. The relationship between A and C is linear, although there can be deviations from linearity at higher concentrations. Atmospheric concentrations are usually defined in C.L units of ppm.m , the number of molecules which would be encountered by the infrared beam in a one meter path. By this definition, an infrared beam passing through 100 meters of a 0.1 ppm gas cloud would exhibit the same absorbence as that of a beam passing through 10 meters of a 1 ppm cloud, or one meter of a 10 ppm cloud. From equation (1), in order to maximize the measured absorbence for a given gas concentration, the largest absorbing path L should be used. Specac Cyclone™ and Tornado™ Gas Cells cover a range of path lengths, up to a maximum of 20m (Tornado™ Cell) which is a good compromise between the needs to maximize path length, and to fit it into a laboratory FTIR spectrometer, without sacrificing optical ‘throughput’. SPECAC LIMITED RIVER HOUSE, 97 CRAY AVENUE, ORPINGTON, KENT, UK, BR5 4HE TELEPHONE: 01689 873134 FAX: 01689 878527 INTERNET: www.specac.com

カタログの1ページ目を開く

Gas cell for pathlength 1 / 1ページ

カタログの抜粋

Specac Ltdのすべてのカタログと技術パンフレット

Gas cell for pathlength
1 / 1ページ