C2
1 / 2ページ

カタログの抜粋

Lever latch Low profile when latched Easy grip adjustment Push button actuation Optional Sealing Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 200 N (45 lbf) Installation Notes * For door thickness greater than 5 (.20) calculate screw length using the following formula: Door thickness + 12 (.47) M5 adjusting screws Lever in raised (open) position *Serrated Mounting Screw M5 x 16 Sealing Notes For sealed option, NEMA 4 / IP65 sealing is achieved by using the supplied flange gasket. B when adjusted to maximum grip Lever in raised (open) position Performance Details B when adjusted to maximum grip A Raised trigger (flush version available) Optional keylock or tool access (available with raised trigger only) Mounting bracket Housing Door Thickness 1 (.04) Minimum 8 (.32) Maximum Door Thickness 1 (.04) Minimum 5 (.20) Maximum Frame Door ACTUAL SIZE Accessories Rubber Bumper: Part Number: C2-25-301-82 (reduces min. and max. grip by 1.6 (0.06) ) Part Number Selection ________________________________________________________________________________ See table Notes For lock core selection and a complete overview of the SOUTHCO® Key-Choice System see www.southco.com Other options available. For complete details on variety, part numbers, installation and specification, go to L Lock style 1 Non-locking raised trigger 2 Key-locking raised trigger keyed CH751 (two flat keys supplied) 3 Flush trigger non-locking 4 4 (.16) Hex recess raised trigger 10 No. 2 Phillips raised trigger 13 Locking without lock core (see page 158 for lock core options) 14 Railway standard F Finish 1 Textured chrome 5 Black powder coated S Sealing Option 3 Non-sealed 4 Sealed Dimensions in millimeters (inch) unless otherwise stated P Packaging option 3 Latches are sold layer packed Omit for individually packaged latches.

カタログの1ページ目を開く

Lever latch · Access indicator of latch access Visual Indicator • eature indicates that latch F has been accessed • Easy grip adjustment • Push button actuation • Integrated bumper screw B when adjusted to maximum grip Green – Unaccessed Red – Accessed (Operated) Panel Preparation Material and Finish Zinc alloy, powder coated or chrome plated and steel, zinc plated ACTUAL SIZE * For door thickness greater than 5 (.20) calculate screw length using the following formula: Door thickness + 12 (.47) Required to reset red indicator back to green Part number: C2-26-301-05 Installation Notes NEMA 4...

カタログの2ページ目を開く