カタログ >
SMW AUTOBLOK >
Manual Chucks HG-F

Manual Chucks HG-F
1 / 6ページ

カタログの抜粋

SYSTEM FORKARDT For highest speeds Flat gripping force curve 180 ■ Jaw change in less than 1 minute FG total gripping force (3 jaws) (kN) ■ he max. gripping force is the total, acting on the 3 jaws, obtained T by applying to the chuck the max. allowed driving torque. The data refers to a chuck newly maintained accordingly to their service manual, using SMW K05 grease. 260 240 220 200 ■ Universal, because jaws can be radially adjusted and reversed = less jaw sets FG total gripping force (3 jaws) (kN) Jaws radially adjustable Jaws 180° reversed 12 SMW-AUTOBLOK dynamic gripping forces have been measured using hardened standard stepped monoblock jaws type GST placed in a position not exceeding the outer diameter of the chuck. Safety advice/danger of damage: When using taller/havier jaws and/or clamping on a more external position reduce driving torque/rotating speed accordingly.

カタログの1ページ目を開く

nual chuck HI-GRIP Direct mounting Wedge bar design guarantees highest precision, concentricity and repeatability as well as highest gripping forces Safety pin indicates correct jaw stroke position ■ No reboring of already machined jaws necessary, because of runout < 0.02 (e.g. HG-F 210) Recess and bolt circle to DIN 55026 / ISO-A 702/1 Safety jaw release with interlock Jaw system ”F“ (compatible with Forkardt jaws) Chuck body is case hardened for highest rigidity, precision and durability SMW-AUTOBLOK 13

カタログの2ページ目を開く

QUICK JAW CHANGE Jaw system Forkardt Main dimensions and technical data Jaw position: open position for external clamping Subject to technical changes For more detailed information please ask for customer drawing SMW-AUTOBLOK Type HG-F Mounting max./min. Base jaw tooth pitch max. total gripping force at max. torque Md Speed Weight without jaws Moment of inertia

カタログの3ページ目を開く

QUICK JAW CHANGE Jaw system Forkardt Ordering review Chuck with center mounting DIN 6350 Chuck with ISO-A mounting DIN 55026 Chuck with bayonet mounting DIN 55027 Type C Chuck with camlock mounting DIN 55029 Type S

カタログの4ページ目を開く

QUICK JAW CHANGE Jaw system Forkardt Chuck MFG Hardened base jaws WAKS Wide soft top jaws Clamping ranges For further jaws and accessories please ask for our 150 pages special catalogue! FST Hardened stepped monoblock jaws BFR Soft monoblock jaws

カタログの5ページ目を開く

QUICK JAW CHANGE Jaw system Forkardt Chuck Clamping ranges Base jaw position ”o“ "0" GUA Hardened reversible stepped top jaws For further jaws and accessories please ask for our 150 pages special catalogue! Important for maintenance and safe operation, to be ordered with the chuck Grease K05® Special grease for manual and power chucks Cartridge 14 Oz. (DIN 1284) Grease content 500 g Id. No. 016440 Grease gun Grease gun (DIN 1283) for cartridges 14 Oz. (DIN 1284). ■ Also refillable from grease can 1000 g. ■ High adhesion ■ High resistance against coolant ■ High load bearing capacity ■ Low...

カタログの6ページ目を開く