TIH L33 series
1 / 2ページ

お気に入りに追加する　

カタログの抜粋

TIH L MB series Induction heaters for non-bearing applications The SKF TIH L MB series is specially designed to heat solid workpieces, such as rings, sleeves, gears, couplings, bushings and pulleys, as well as train wheels, tires or similar components. Featuring one magnetic coil in the center, these powerful and durable heaters localize the heating in the workpiece bore for superior performance on solid components. The TIH L MB series provides the following advantages for quick and effective heating of solid workpieces: • • • • • • • Simple and safe operation with remote-control and power level selection Superior heating performance for solid workpieces with low energy consumption Quick and easy placement of solid components with sliding yoke Automatic demagnetization reduces risk of ferrous debris contamination Easy to transport using standard forklift Available in three voltage variants to suit most operating voltages worldwide Available with three different operating areas The TIH L MB heats non-bearing workpieces up to 600 kg (1 323 lb), depending on the model. The TIH L MB induction heater is equipped with a remote control panel for operator safety. Advice: The SKF TIH L MB series heaters are designed for induction heating of solid, non-bearing components. For bearingheating applications, we recommend the use of equivalent SKF TIH L seri

カタログの1ページ目を開く

Technical data Designation Maximum workpiece weight Bore diameter range Coil diameter Standard yokes (included) to suit workpiece minimum bore diameter Temperature control Time control 0–120 minutes; in steps of 0,1 minute 0–120 minutes; in steps of 0,1 minute 0–120 minutes; in steps of 0,1 minute Demagnetisation according to SKF norms Maximum heating temperature 2) Some special voltage versions (e.g. 575V, 60Hz CSA ready) are available for specific countries. For additional information, please contact your local SKF authorised distributor. Depending on bearing or workpiece weight. For...

カタログの2ページ目を開く

SKF Maintenanceのすべてのカタログと技術パンフレット

1. 

   Portable induction heater TMBH 5

   4 ページ

2. 

   SKF Belt alignment tool TKBA 40

   2 ページ

3. 

   SKF Belt alignment tool TKBA 31

   2 ページ

4. 

   SKF Belt alignment tool TKBA 21

   2 ページ

5. 

   SKF Belt alignment tool TKBA 11

   2 ページ

6. 

   SKF XP Chains - Extra Performance series

   4 ページ

7. 

   SKF Low Temperature, Extremely High Speed Bearing Grease LGLT 2

   2 ページ

8. 

   SKF Induction heaters

   12 ページ

9. 

   SKF Couplings

   112 ページ

10. 

    SKF Transmission Chains

    98 ページ

11. 

    SKF Xtra Power Belts

    24 ページ

12. 

    Electric motor bearing grease LGHQ 2

    2 ページ

13. 

    Electronic stethoscope TKST 11

    2 ページ

14. 

    Ultrasound lubrication checker TLGU 10

    2 ページ

15. 

    Digital tachometers TKRT series

    4 ページ

16. 

    Battery-driven grease gun TLGB 1886-E

    1 ページ

17. 

    Battery-driven grease gun TLGB 1262-E

    1 ページ

18. 

    General purpose food grade grease LGFG 2

    2 ページ

19. 

    Cabled electro-mechanical single point automatic lubricators TLSD 1-DK

    4 ページ

20. 

    Extreme pressure grease LGEP 1

    2 ページ

21. 

    SKF High Load, Extreme Pressure, Wide Temperature Range Bearing Grease LGWA 2

    2 ページ

22. 

    SKF Extreme Temperature, Extreme Condition Bearing Grease LGET 2

    2 ページ

23. 

    SKF High Performance, High Temperature Bearing Grease LGHP 2

    2 ページ

24. 

    SKF High Load, High Temperature, High Viscosity Bearing Grease LGHB 2

    2 ページ

25. 

    SKF Extreme Pressure, Low Temperature Bearing Grease LGWM 1

    2 ページ

26. 

    SKF Extremely high viscosity bearing grease with solid lubricants LGEV 2

    2 ページ

27. 

    SKF General purpose industrial and automotive bearing grease LGMT 2

    2 ページ

28. 

    SKF High load, extreme pressure bearing grease LGEP 2

    2 ページ

29. 

    SKF Dry Film Lubricant LDTS 1

    2 ページ

30. 

    High temperature and harsh environment food grade grease LGED 2

    2 ページ

31. 

    SKF General purpose industrial and automotive bearing grease LGMT 3

    2 ページ

32. 

    Grid and gear coupling grease LMCG 1

    2 ページ

33. 

    SKF Food Grade Lubricants High load, water resistant and wide temperature food grade grease LGFQ 2

    2 ページ

34. 

    SKF High Viscosity Bearing Grease with Solid Lubricants LGEM 2

    2 ページ

35. 

    High load, water resistant, high temperature grease

    2 ページ

36. 

    SKF Food Grade Lubricants General purpose food grade grease LGFP 2

    2 ページ

37. 

    SKF Biodegradable Bearing Grease LGGB 2

    2 ページ

38. 

    SKF High Load, Wide Temperature Bearing Grease LGWM 2

    2 ページ

39. 

    SKF Gloves

    2 ページ

40. 

    SKF Oil Check Monitor TMEH 1

    2 ページ

41. 

    SKF MultiPoint Automatic Lubricator TLMP series

    2 ページ

42. 

    SKF Infrared thermometers

    4 ページ

43. 

    SKF SYSTEM 24 LAGD Series - Leaflet

    4 ページ

44. 

    Oil leveller LAHD series

    2 ページ

45. 

    SKF Grease Pumps LAGG series

    2 ページ

46. 

    Low temperature chassis grease LGLS 0

    2 ページ

47. 

    Chassis grease LGLS 2

    2 ページ

48. 

    SKF bearing grease selection chart

    8 ページ

49. 

    Manual lubrication tools

    4 ページ

50. 

    SKF Ultrasonic Leak Detector TKSU 10

    2 ページ

51. 

    SKF Battery Driven Grease Gun TLGB 20

    4 ページ

52. 

    Anti-fretting agent LGAF 3E

    2 ページ

53. 

    Oil handling containers LAOS Series

    4 ページ

54. 

    SKF Stroboscopes TKRS series

    4 ページ

55. 

    SKF Fixed Induction Heater EAZ series

    4 ページ

56. 

    SKF Automatic Lubricant Dispenser TLMR series

    4 ページ

57. 

    SKF Automatic lubricators - Brochure

    16 ページ

58. 

    SKF Shaft Alignment Tools

    20 ページ

59. 

    SKF SYSTEM 24 TLSD 125 / TLSD 250

    4 ページ

60. 

    SKF Vibracon

    8 ページ

61. 

    SKF Chain Oils

    4 ページ

62. 

    SKF Maintenance and Lubrication Product

    204 ページ

63. 

    SKF Hydfraulic pump THHP 300

    2 ページ

64. 

    SKF Power Transmission Product Catalogue

    344 ページ

65. 

    SKF Xtra Power Lawn and Garden Belts

    40 ページ

66. 

    SKF Power Transmission Belts

    170 ページ

67. 

    SKF FX Keyless Bushings

    32 ページ

68. 

    SKF Conveyor Chains

    140 ページ

69. 

    TMIP and TMIC Series

    4 ページ

70. 

    SKF TWIM 15

    4 ページ

71. 

    SKF Bearing Fitting Tool Kit TMFT 36

    2 ページ

72. 

    Spanners and sockets

    8 ページ

73. 

    Elevator lubrication sets

    2 ページ

74. 

    SKF Heavy Duty Jaw Pullers TMMP & TMHP series

    2 ページ

75. 

    SKF Air-driven Hydraulic Pumps and Oil Injectors, THAP E series

    2 ページ

76. 

    SKF Combi Kit TMMK series

    4 ページ

77. 

    SKF Spherical washers

    2 ページ

78. 

    Oil conditioning station

    8 ページ

79. 

    SKF Mounting and dismounting fluids

    2 ページ

80. 

    TIH L MB series

    2 ページ

81. 

    SKF Blind housing pullers

    4 ページ

82. 

    SKF Reversible Jaw Puller TMMR F series

    4 ページ

83. 

    Mechanical tools

    4 ページ

84. 

    SKF Electrical Discharge Detector Pen TKED 1

    2 ページ

85. 

    SKF Thermometer TKDT 10

    2 ページ

86. 

    SKF Machinery Shims TMAS series

    2 ページ

87. 

    SKF Mechanical tools accessories TMHS 75 / TMHS 100 / TMMS / TMMX

    4 ページ

88. 

    Large induction heater TIH 220m

    2 ページ

89. 

    SKF medium induction heater TIH 100m

    2 ページ

90. 

    SKF small induction heater TIH 030m

    2 ページ

91. 

    SKF Pressure Gauges

    2 ページ

92. 

    SKF Oil Injector 226400 E series

    2 ページ

93. 

    SKF EasyPull TMMA series

    4 ページ

94. 

    Multi-core induction heaters, TIH MC series

    2 ページ

95. 

    SKF Hydraulic & Strong Back Pullers

    4 ページ

96. 

    SKF Endoscopes TKES 10 series

    2 ページ

97. 

    SKF Standard Jaw Pullers TMMP series

    2 ページ

カタログアーカイブ

1. 

   SKF Maintenance and Lubrication Products

   188 ページ