GC500 - Synchro/Parallel genset controller
1 / 4ページ

GEN-SET CONTROLLER Empowering your control GEN-SET CONTROLLER • Great performances • Several communication • RI.NA. version for marine • User friendly and intuitive • Italian design Genset controller for synchro/parallel • Comprehensive genset controller for single and multiple synchro/parallel applications working for production or emergency plants o GC500 is particularly recommended for those plants comprising several gensets working in synchro/parallel in island mode (it is able to manage up to 16 gensets connected on the same bus), or in case of a single production genset working in synchro/parallel with the mains; o GC500 is recommended for those plants where it's required the management of both genset and mains circuit breakers. • Internal Load sharing, Synchronizer (via CAN or PWM) and VAR regulation for Mains • PWM (500Hz) direct interface with CATERPILLAR, PERKINS and gensets with similar regulation system • Mains and Genset circuit breaker management. With GC500 there is a proper MCB push button available • J1939 and MTU MDEC CAN interface and Interface with traditional sensors engines • True RMS readings on generator and mains voltages and currents with additional current measurement for neutral or ground fault protection (51N) • Active, Reactive and Apparent power measurement • Frequency and power measurement on Mains input • 18+3 fully programmable digital inputs • 16 digital outputs + 2 Fixed • N.2 Serial ports MODBUS RTU

GC500 is a comprehensive genset controller for synchro/ parallel applications. It is available in two versions: GC500Plus, particularly suggested for managing multiple gensets working in synchro/parallel and in island mode or for single and production genset working in synchro/parallel with the mains, and GC500Mains,useful when the management of both genset and mains circuit breakers is required (e.g. in case of a single genset with the back synchro requirement). Both versions are able to manage the synchronization up to 16 gensets connected on the same bus. GC500Plus and GC500Mains are...

Underfrequency (81U) Overfrequency (81O) Undervoltage (27) Overvoltage (59) Rate of change of frequency (df/dt, RoCoF, 81R) Vector surge/jump  N. 18 Programmable digital inputs  N. 3 Analogue inputs, if not used, can be used as not insulated digital inputs  N. 2 Analogue inputs (0...5V - 0...10V)  N. 1 Analogue insulated voltage output (potentiometer adjustable from ±1V to ±10V DC) for SPEED GOVERNOR  N. 1 Analogue insulated voltage output (potentiometer adjustable from ±1V to ±10V DC) for AVR N. 1 Relay (3A) fuel solenoid N. 3 Relay (3A) programmable outputs N. 2 Relay (1A)...

CEN-SET CONTROLLER GEN-SET CONTROLLER Societa Italiana Costruzioni Elettriche Sumirago 21040 - Jerago con Orago (VA) ITALY SICES BRASIL LTDA Condominio Empresarial ONIX