GC-6101 Extended RS232 and RS485 Communication Module
1 / 12ページ

GC-6101 Extended RS232 and RS485 communication module User manual

Vhandy Technology Revise history version Create document Correct equipment working parameters

Vhandy Technology

Vhandy Technology 1. Function Introduction 1.1 Functional Overview The GC-6101 module is an expansion communication module that integrates one RS232 and one RS485. This module can be used to expand serial communication, send and receive data through the serial port, send the received serial bus data to the GCAN-PLC-400/510 series PLC controller through the internal bus, and write complex programs by calling the extended serial port function block to achieve complex Bus control requirements. This module can be used with any other GC series IO module to realize the transmission and reception...

Vhandy Technology 2. Equipment installation and use This chapter will explain in detail the installation method, wiring method, the meaning of the indicator light and the meaning of the interface of the GC-6101 module. 2.1 Module fixing The installation method of the GC-6101 module is shown in Figure 2.1. You need to use a flat-blade screwdriver for auxiliary installation. Figure 2.1 GC-6101 module installation First, you need to install the fieldbus coupler on the rail, and then attach the GC-6101 module to the right of the fieldbus coupler or other modules to add this component. As shown...

Vhandy Technology Figure 2.2 GC-6101 module installation Figure 2.3 GC-6101 module terminal block The terminal block of GC-6101 module is shown in Figure 2.3. GC-6101 contains 2 extension serial ports. The serial numbers corresponding to the terminals and their meanings are shown in Table 2.1.

Vhandy Technology Serial number 5 232GND 6 Unused 7 Unused 8 Unused Table 2.1 Pin definition of GC-6101 module 2.3 System status indicator The GC-6101 module has one power indicator and one initialization status indicator to indicate the operating status of the device. The specific indication function of the indicator light is shown in Table 2.2. When the indicator is on, the GC-6101 module status is shown in Table2.3. Indicator light Indication status POWER INIT green Power indicator red Initialization status indication Table 2.2 GC-6101 indicator lights After the power supply of the...

Vhandy Technology 3. Technical specifications Connection method Wiring form Interface characteristics Communication signal Electrical isolation Power supply Configuration method Environmental test Operating temperature Working humidity EMC test Anti-vibration/impact resistance Anti-electromagnetic interference/anti-electromagneti c radiation performance Protection level Basic Information Dimensions weight Serial RS232, RS485 line 2 way 500 Vrms （ GC-bus/signal voltage） Powered by GCAN-PLC-400 or GCAN-8000/8100 coupler, consumes about 200mA By configuring the function block definition in the...

Vhandy Technology 4. Disclaimer Thank you for purchasing GCAN's GCAN series of hardware and software products. GCAN is a registered trademark of Shenyang Vhandy Technology Co., Ltd. This product and manual are copyrighted by Vhandy Technology. Without permission, it is not allowed to reproduce in any form. Before using, please read this statement carefully. Once used, it is deemed to be an endorsement and acceptance of the entire content of this statement. Please strictly abide by the manual, product description and related laws, regulations, policies and guidelines to install and use the...

Vhandy Technology 5. Module selection table GCAN-PLC-400 series products consist of a programmable main control module, several GC series IO modules and a terminal resistance module. GC series IO modules currently include five categories: digital input, digital output, analog input, analog output, and communication extension. The specific selection table is shown in Table 5.1. I/O relay output Voltage input, 16 bits Voltage input, 16 bits Digital input Current input, 16 bits Current input, 16 bits Voltage input, 16 bits Voltage input, 16 bits Thermal resistance Thermal resistance

Vhandy Technology Voltage output, 16 bits Current output, 16 bits Current output, 16 bits Voltage output, 16 bits Voltage output, 16 bits Voltage output, 12 bits Special module Voltage output, 16 bits Analog output K type / S type / T type thermocouple GPRS extension WiFi extension Table 5.1 Selection table

Vhandy Technology Sales and service Shenyang Vhandy Technology Co., Ltd. Address: Room 401, D11 Block, SISP., Hunnan District, Shenyang, Liaoning, China E-mail: info@gcanbus.com Tel/ Whatsapp: +86-13644001762 Website: gcanbus.com