GC-4674-4 Channel Analog Output Module (0V~+10V)
1 / 12ページ

GC-4674 4-channel analog output module (0V~+10V) User manual

Vhandy Technology

Vhandy Technology 1. Function introduction 1.1 Function overview GC-4674 (4-channel analog output module, 0V~+10V) can be used to output signals in the range of 0V~+10V. This terminal module can provide electrical isolation signals with a resolution of 12 bits for the processing layer. The GC-4674 module has 2 two-wire output terminals, which are especially suitable for installation in a control cabinet to save space. The GC-4674 module has a common ground potential terminal, and the power contacts are connected together. The reference ground of the output terminal is the 0V power contact....

Vhandy Technology 2.1 Module fixing The installation method of GC-4674 module is shown in Figure 2.1. You need to use a flat-blade screwdriver to assist in installation. Figure 2.1 GC-4674 module installation First, you need to install the fieldbus coupler on the rail, and then attach the GC-4674 module to the right side of the fieldbus coupler or other modules to add this component. Please insert the GC-4674 module inward along the slot as shown in Figure 2.1 until the lock catches. The GC-4674 module is powered by GC-bus, no additional power supply is required. You only need to connect...

Vhandy Technology Figure 2.2 GC-4674 module installation Figure 2.3 GC-4674 module wiring terminal block The wiring terminal block of GC-4674 module is shown in Figure 2.3. GC-4674 contains 2 groups of output points, and can connect to 2 groups of analog signals at most. The serial numbers corresponding to each terminal and their meanings are shown in Table 2.1.

Vhandy Technology Serial number 1 The first group of voltage signal is positive 2 Group 1 voltage signal negative 3 Group 2 voltage signal positive 4 Group 2 voltage signal negative 5 Group 3 voltage signal positive 6 Group 3 voltage signal negative 7 Group 4 voltage signal positive 8 Group 4 voltage signal negative Table 2.1 Indicators of GC-4674 module 2.3 System status indicator The GC-4674 module has 2 running indicators to indicate the running status of the device. The specific indication function of the indicator light is shown in Table 2.2. When the indicator is on, the status of the...

Vhandy Technology additional attributes of the variable (Note: Input only affects input, output only affects output, and output and input do not affect each other. That is, if there is and only an input module in front of the output module, then no matter how many input modules there are in front, the address of the first output module is still Q0 .0.) 2.5 Combination with GCAN-IO-8000 series equipment The status of the analog output is represented by two bytes. For example: GCAN-IO-8000 module node number is 1, if you want the input state of channel 1 of the first GC-4674 module to be +5V,...

Vhandy Technology 3. Technical specifications Interface characteristics Output points Signal voltage power supply Resolution Conversion time Measurement error 4 0V~+10V Power supply via GC-bus 12 bits ~4 ms ESD rating Electrical isolation GC-bus current consumption Bit width in the process image configuration Pluggable wiring Output: 2 x 2 bytes No address setting, configuration via bus coupler or controller Applicable to all GCAN-PLC-400 series, GCAN-8000 series Environmental test Operating temperature -40℃~+85℃ Working humidity 95%RH, no condensation EMC test EN 55024:2011-09...

Vhandy Technology 4. Disclaimer Thank you for purchasing GCAN's GCAN series of hardware and software products. GCAN is a registered trademark of Shenyang Vhandy Technology Co., Ltd. This product and manual are copyrighted by Vhandy Technology. Without permission, it is not allowed to reproduce in any form. Before using, please read this statement carefully. Once used, it is deemed to be an endorsement and acceptance of the entire content of this statement. Please strictly abide by the manual, product description and related laws, regulations, policies and guidelines to install and use the...

Vhandy Technology 5. Module selection table GCAN-PLC-400 series products consist of a programmable main control module, several GC series IO modules and a terminal resistance module. GC series IO modules currently include five categories: digital input, digital output, analog input, analog output, and communication extension. The specific selection table is shown in Table 5.1. I/O relay output Voltage input, 16 bits Voltage input, 16 bits Current input, 16 bits Current input, 16 bits Voltage input, 16 bits Voltage input, 16 bits Digital input Analog input Thermal resistance Thermal resistance

Vhandy Technology K type / S type / T type Voltage output, 16 bits Current output, 16 bits Current output, 16 bits Voltage output, 16 bits Voltage output, 16 bits Voltage output, 12 bits Voltage output, 16 bits GPRS extension WiFi extension Table 5.1 Selection table

Vhandy Technology Sales and service Shenyang Vhandy Technology Co., Ltd. Address: Room 401, D11 Block, SISP., Hunnan District, Shenyang, Liaoning, China E-mail: info@gcanbus.com Tel/ Whatsapp: +86-13644001762 Website: gcanbus.com