GC-4642-2 Channel Analog Output Module (0mA~20mA)
1 / 12ページ

GC-4642 2-channel analog output module(0mA~20mA) User manual

Vhandy Technology

Vhandy Technology 1. Function Introduction 1.1 Functional Overview GC-4642 (2-channel analog output module, 0-20mA) can be used to output signals in the range of 0-20mA. This terminal module can provide electrical isolation signals with a resolution of 16 bits for the processing layer. The GC4642 module has 2 two-wire output terminals, which are especially suitable for installation in a control cabinet to save space. The GC-4642 module has a common ground potential terminal, and the power contacts are connected together. The reference ground of the output terminal is the 0V power contact....

Vhandy Technology 2. Equipment installation and use This chapter will explain in detail the installation method, wiring method, the meaning of the indicator light and the meaning of the interface of GC-4642 module. 2.1 Module fixing The installation method of the GC-4642 module is shown in Figure 2.1. You need to use a flat-blade screwdriver for auxiliary installation. Figure 2.1 GC-4642 module installation First, you need to install the fieldbus coupler on the rail, and then attach the GC-4642 module to the right of the fieldbus coupler or other modules to add this component. As shown in...

Vhandy Technology firmly locked in the circular hole. Figure 2.2 GC-4642 module installation Figure 2.3 GC-4642 module terminal block The terminal block of GC-4642 module is shown in Figure 2.3. GC-4642 contains 2 sets of output points, and can connect up to 2 sets of analog signals. The serial numbers corresponding to the terminals and their meanings are shown in Table 2.1.

Vhandy Technology Serial number 1 Group 1 signal voltage output 2 Group 1 signal reference ground 3 Group 2 signal voltage output 4 Group 2 signal reference ground Table 2.1 GC-4642 module indicator 2.3 System status indicator The GC-4642 module has 4 operating indicators to indicate the operating status of the device. The specific indication function of the indicator light is shown in Table 2.2. When the indicator is on, the GC-4642 module status is shown in Table 2.3. Indicator light Indication status green Operating instructions Table 2.2 GC-4642 module indicator When the output signal...

Vhandy Technology integer from %Q0.0 address. AT stands for the address of variable access and the additional attributes of the variable (see page 46 of the e-book for details). (Note: Input only affects input, output only affects output, output and input do not affect each other. That is, if there is and only an input module in front of the output module, then no matter how many input modules are in front, the address of the first output module is still Q0 .0.) 2.5 Combination with GCAN-IO-8000 series equipment The status of the analog output is represented by two bytes. For example:...

Vhandy Technology 3. Technical specifications Interface characteristics Output points Signal voltage load power supply Resolution Conversion time Measurement error ESD rating Electrical isolation Current consumption Bit width in process image configuration Pluggable wiring Environmental test Operating temperature Working humidity EMC test Anti-vibration/impact resistance Anti-electromagnetic interference/anti-electromagn etic radiation performance Protection class Basic Information Dimensions weight 2 0mA~20mA ＞5kΩ (Short circuit protection) Powered by external 24V 16 bits 4ms ＜±0.1% (full...

Vhandy Technology 4. Disclaimer Thank you for purchasing GCAN's GCAN series of hardware and software products. GCAN is a registered trademark of Shenyang Vhandy Technology Co., Ltd. This product and manual are copyrighted by Vhandy Technology. Without permission, it is not allowed to reproduce in any form. Before using, please read this statement carefully. Once used, it is deemed to be an endorsement and acceptance of the entire content of this statement. Please strictly abide by the manual, product description and related laws, regulations, policies and guidelines to install and use the...

Vhandy Technology 5. Module selection table GCAN-PLC-400 series products consist of a programmable main control module, several GC series IO modules and a terminal resistance module. GC series IO modules currently include five categories: digital input, digital output, analog input, analog output, and communication extension. The specific selection table is shown in Table 5.1. I/O relay output Voltage input, 16 bits Voltage input, 16 bits Current input, 16 bits Current input, 16 bits Voltage input, 16 bits Voltage input, 16 bits Digital input Digital output Analog input Thermal resistance...

Vhandy Technology Voltage output, 16 bits Current output, 16 bits Current output, 16 bits Voltage output, 16 bits Voltage output, 16 bits Voltage output, 12 bits Special module Voltage output, 16 bits Analog output K type / S type / T type thermocouple GPRS extension WiFi extension Table 5.1 Selection table

Vhandy Technology Sales and service Shenyang Vhandy Technology Co., Ltd. Address: Room 401, D11 Block, SISP., Hunnan District, Shenyang, Liaoning, China E-mail: info@gcanbus.com Tel/ Whatsapp: +86-13644001762 Website: gcanbus.com