GC-3844-4 Channel K-type Thermocouple Input Module
1 / 12ページ

GC-3844 4-channel K-type thermocouple input module (TC) User manual

Vhandy Technology

Vhandy Technology 1. Function Introduction 1.1 Function Overview The GC-3844 module is an I/O module that integrates 4 input channels of temperature sensors (K-type thermocouples). This module can be used to collect temperature information in real time and send the collected values to GCAN-PLC-400 or GCAN-8000/8100 series couplers through the internal bus. This module can be used with any other GC series IO module to realize the acquisition and processing of analog data in industrial automation or distributed control systems. 1.2 Performance characteristics ● The number of input points is...

Vhandy Technology 2. Equipment installation and use This chapter will explain in detail the installation method, wiring method, the meaning of the indicator light and the meaning of the interface of the GC-3844 module. 2.1 Module fixing The installation method of GC-3844 module is shown in Figure 2.1, you need to use a flat screwdriver for auxiliary installation. Figure 2.1 GC-3844 module installation First, you need to install the fieldbus coupler on the rail, and then attach the GC-3844 module to the right of the fieldbus coupler or other modules to add this component. As shown in Figure...

Vhandy Technology Figure 2.2 GC-3844 module installation Figure 2.3 GC-3844 module terminal block The terminal block of GC-3844 module is shown in Figure 2.3. GC-3844 contains 4 sets of input points, and can connect up to 4 K-type thermocouples sensors. The serial numbers corresponding to the terminals and their meanings are shown in Table 2.1.

Vhandy Technology Serial number +TC1 input -TC1 input +TC2 input -TC2 input +TC3 input -TC3 input +TC4 input -TC4 input 2.3 System statusindicator The GC-3844 module has 4 error indicators and 4 operation indicators to indicate the operating status of the device. The specific indication function of the indicator light is shown in Table 2.2. When the indicator is on, the GC3844 module status is shown in Table 2.3. Indicator light Indication status Red Error indication green Operating instructions Table 2.2 GC-3844 module indicator After the GC-3844 module is connected to the K-type...

Vhandy Technology first channel, each channel occupies 2 bytes, the collected temperature corresponds to -32768~+32767 so the second The starting address of the channel is I2.0. When the user uses more than one GC-3844 module, the second GC-3844 needs to be defined from "I8.0", because each 3844 has 4 channels; "%" (percent sign) is the direct variable start symbol : ":" (semicolon) is a variable or type separator. Use the symbol variable AI0 to read the signed integer from the %I0.0 address. AT stands for the address of variable access and the additional attributes of the variable (see...

Vhandy Technology 3. Technical specifications Connection method Wiring form Interface characteristics Input points sensor type temperature range Resolution Conversion time Measuring current Measurement error Electrical isolation Power supply Bit width in process image Configuration method Environmental test Operating temperature Working humidity EMC test Anti-vibration/impact resistance Anti-electromagnetic interference/anti-electromag netic radiation performance Protection level Basic Information Dimensions weight 2-wire system 4 K-type thermocouples -200~+900℃ 0.1℃/digital ＜250 ms 0.5 mA...

Vhandy Technology 4. Disclaimer Thank you for purchasing GCAN's GCAN series of hardware and software products. GCAN is a registered trademark of Shenyang Vhandy Technology Co., Ltd. This product and manual are copyrighted by Vhandy Technology. Without permission, it is not allowed to reproduce in any form. Before using, please read this statement carefully. Once used, it is deemed to be an endorsement and acceptance of the entire content of this statement. Please strictly abide by the manual, product description and related laws, regulations, policies and guidelines to install and use the...

Vhandy Technology 5. Module selection table GCAN-PLC-400 series products consist of a programmable main control module, several GC series IO modules and a terminal resistance module. GC series IO modules currently include five categories: digital input, digital output, analog input, analog output, and communication extension. The specific selection table is shown in Table 6.1. I/O relay output Voltage input, 16 bits Voltage input, 16 bits Current input, 16 bits Current input, 16 bits Voltage input, 16 bits Voltage input, 16 bits Digital input Digital output Analog input Thermal resistance...

Vhandy Technology Voltage output, 16 bits Voltage output, 16 bits Current output, 16 bits Current output, 16 bits Voltage output, 16 bits Voltage output, 16 bits Voltage output, 12 bits Special module Analog output K type / S type / T type thermocouple GPRS extension WiFi extension Table 5.1 Selection table

Vhandy Technology Sales and service Shenyang Vhandy Technology Co., Ltd. Address: Room 401, D11 Block, SISP., Hunnan District, Shenyang, Liaoning, China E-mail: info@gcanbus.com Tel/ Whatsapp: +86-13644001762 Website: gcanbus.com