ウェブサイト:
SERVOMEX
グループ: Spectris
カタログの抜粋
APPROVALS, CERTIFICATES AND CONDITIONS Part Number: Revision: Language: OPERATOR MANUAL 02500008E 1 UK English
カタログの1ページ目を開く
This page intentionally blank
カタログの2ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual CONTENTS 1. INTRODUCTION 2. IECEx APPROVAL FOR USE IN AREAS THAT REQUIRE EPL Gc (GASES) IECEx APPROVAL FOR USE IN AREAS THAT REQUIRE EPL Db (DUSTS) 3. FM DIVISION 2 / ZONE 2 APPROVAL 4. IECEx APPROVAL FOR USE IN AREAS THAT REQUIRE EPL Gb (GASES)
カタログの3ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの4ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual The 2500 series of analysers (2500, 2510, 2520, 2550) have been approved by various authorities for installation in hazardous areas. The certification offered with a specific analyser will depend upon the analyser specification and country of delivery. See the certification labels attached to the analyser for approval details. The different sections of this manual contain copies of the approval certificates obtained. The installer and/or the user of the analyser must be satisfied that the installation complies with any “Special...
カタログの5ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの6ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual 2. IECEx Approval for use in areas that require EPL Gc (Gases) IECEx Approval for use in areas that require EPL Db (Dusts) 2500 Series - EX2 The 2500 series EX2 instruments (2500, 2510, 2520 and 2550) have been certified as Ex n in accordance with IEC 60079-0:2011, IEC 60079-11:2011 and IEC 60079-15:2010, and are suitable for use in areas that require EPL Gc (e.g. Zone 2). The 2500 series EX2 instruments (2500, 2510, 2520 and 2550) have also been certified as Ex tb in accordance with IEC 60079-0:2011 and IEC 60079-31:2008, and are...
カタログの7ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの8ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの9ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの10ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの11ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの12ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの13ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの14ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual 3. FM Hazardous Location Approval 2500 Series - FM2 The 2500 series has been approved for use in US Class I, Division 2 and Class I, Zone 2 locations without safety purging. 02500FM2 units fitted with electrically heated sample cells must be installed in locations which provide adequate protection against the entry of solid foreign bodies and liquids capable of impairing safety. The analyser will appear in the Factory Mutual Approval Guide as shown. Certificate No.: FM19US0094X Special condition of these certificates is: 1. Precautions...
カタログの15ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの16ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの17ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの18ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの19ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの20ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual IECEx Approval for use in areas that require EPL Gb 2500 Series – EX1 (Not 2520 Analyser) The 2500 series EX1 instruments (2500, 2510 and 2550) have been certified as Ex px in accordance with IEC 60079-0:2007, IEC 60079-2:2007 and IEC 60079-11:2006, and are suitable for use in areas that require EPL Gb (e.g. Zone 1). The instrument must be used with an IECEx certified Purge Control System in order to be operated safely. Code: Ex px ia [ia] IIC T5 Gb (Tamb = -20°C to +55°C) Ex px ia [ia] IIC T4 Gb (Tamb = -20°C to +55°C), fitted with...
カタログの21ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual The PCS is required to carry out a purge cycle after a pressure loss before power can be restored to the equipment. The PCS shall contain a pressure sensing element which is factory set to a level not less than the specified minimum (50 Pa, 0.5 mbar) and shall measure pressure at the point in the system where the lowest pressure occurs. The PCS shall supply a flow rate of protective gas not less than 10 standard litres per minute and shall incorporate an automatic device to monitor flow during the purge time specified below. The PCS...
カタログの22ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの23ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの24ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの25ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの26ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの27ページ目を開く
SERVOTOUGH SpectraExact Certification Supplement Manual
カタログの28ページ目を開くSERVOMEXのすべてのカタログと技術パンフレット
-
Service Guide Issue 413 ページ
-
Product Guide Issue 915 ページ
-
Gas Guide Issue 574 ページ
-
SERVOTOUGH OxyExact 220016 ページ
-
SERVOPRO 4900 Multigas10 ページ
-
SERVOPRO PureGas4 ページ
-
DF560E Operator Manual144 ページ
-
DF-745 Operator Manual112 ページ
-
ES 39 Sustainability11 ページ
-
ES 38 Korea Special19 ページ
-
ES 37 Clean Air part II11 ページ
-
ES 36 Purity & Specialty11 ページ
-
ES 34 70th Anniversary15 ページ
-
ES 29 Clean Air11 ページ
-
Sensing Technologies13 ページ
-
DF760E Operator Manual182 ページ
-
DF750 Operator Manual112 ページ
-
DF-740 Operator Manual87 ページ
-
DF-730 Operator Manual82 ページ
カタログアーカイブ
-
SERVOTOUGH H2 Scan2 ページ
-
SERVOPRO NOx4 ページ
-
SERVOPRO HFID4 ページ
-
Servomex Gas Guide 202265 ページ
