カタログ >
Scitec Instruments >
IR Source Series 12

IR Source Series 12
1 / 6ページ

カタログの抜粋

Infrared Source Series 12 • Supported, Coil Wound • IR-12 & IR-12R operate at 900 C when powered with 10 watts • IR-12K operates at 975°C when powered with 11 watts These popular units have been in production since 1980. They are considered rugged and reliable. The coiled filament operates at approximately 900: C when powered with 10 watts for the standard IR-12 and IR-12R sources and 975 C when powered with 11 watts for the IR-12K. The radiating element is a coil of resistance wire which has a high emissivity in the Infrared spectral region. The coil is supported on a grooved cylindrical substrate of alumina, resulting in the windings being electrically insulated from each other. This contributes to a more uniform radiating source. The unit does not require operation in a sealed atmosphere. The header is fabricated from cold-rolled steel. The support pins are hermetically sealed in glass. The IR-12 Series is offered in several configurations. The standard IR-12 is shown below. The IR-12R is a standard IR-12 fabricated with the header flange in the reverse direction. The IR-12 Series also includes the IR-12K which uses Kanthal A-1 resistance wire for higher temperatures. Recommended Operating Parameters The Barn. 10A Silver Street. Bradford on Avon. Wiltshire, BA15 1JY

カタログの1ページ目を開く

HawkEye IR-12 Engineering Data Charts The Barn. 10A Silver Street. Bradford on Avon. Wiltshire, BA15 1JY

カタログの2ページ目を開く

IR-12K Engineering Data Charts Powervs Voltage The Barn. 10A Silver Street. Bradford on Avon. Wiltshire, BA15 1JY

カタログの3ページ目を開く

Note: oil dimensions in incfes. The Barn. 10A Silver Street. Bradford on Avon. Wiltshire, BA15 1JY

カタログの4ページ目を開く

The Barn. 10A Silver Street. Bradford on Avon. Wiltshire, BA15 1JY

カタログの5ページ目を開く

Lifetime tests conducted 9/2002-912009 AUnits that have failed i Units still in operation The Barn. 10A Silver Street. Bradford on Avon. Wiltshire, BA15 1JY

カタログの6ページ目を開く