Technical Data Sheet_SDC
1 / 4ページ

echnical Data Sheet SDC Rectifier / Battery Charger >24-220V >25-1200 A H la-s y I i i GUTOR Schneider Electric

Technical data SDC Voltage 3x380/400/415V Input voltage tolrance: DC in tolrance +/-10 % for function +15 %/-25 % (below -15 % the battery might begin to discharge) Frequency 50 / 60 Hz Frequency tolerance +/- 8 % Power factor: at nominal line power and float voltage ~ 0.83 at -10 % line power and float voltage ~ 0.90 at +10 % line power and float voltage ~ 0.75 Rectifier input Voltage 24/48/110/125/220VDC Setting range: Float voltage at -10 /+10 % line power voltage 100-120 % Float voltage at 0 /+10 % line power voltage 100-130 % Boost voltage at nominal line power voltage 100-130 %...

Cat Gen GB 2004 table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:12.00pt "Arial", sans-serif; } .font1 { font:13.00pt "Arial", sans-serif; } .font2 { font:32.00pt "Arial", sans-serif; } .font3 { font:4.00pt "Lucida Sans Unicode", sans-serif; } .font4 { font:5.00pt "Lucida Sans Unicode", sans-serif; } .font5 { font:6.00pt "Lucida Sans Unicode", sans-serif; } .font6 { font:8.00pt "Lucida Sans Unicode", sans-serif; } .font7 { font:13.00pt "Lucida Sans Unicode", sans-serif; } Spcification SDC Bottom cable entry Typical single-line drawing Ground terminal rWI...

Human-machine interface (front panel) The front panel, which is identical for both AC and DC Systems, includes a comprehensive and flexible human-machine i nterface. It is divided into four sections: The system panel shows the system's current state of operation (which part of the system is currently supplying the load and which is in stand-by mode). LEDs also indicate possible faults. Oprations for turning on and off the system and a lamp test button for checking whether all LED indications are functioning properly. To shut down the system, you have to press the ON and OFF buttons at the...