Technical Data Sheet_PXP
1 / 4ページ

Technical Data Sheet PXP AC UPS System > PXP 1000 5-160 kVA single phase >PXP 3000 5-160 kVAthree phase GUTOR by schneider Electric

Technical data PXP Rectifier input voltage_3x380/ 400 /415 V Rectifier input voltage tolerance -10 /+15 % Rectifier input frequency 41 - 70 Hz (auto detection) Rectifier current total harmonic distortion <5 % @ 100 % load Rectifier input power factor typical 0.96 - 0.98 Inrush current <8 - 10In Bypass input voltage PXP 1000 1x220/ 230 / 240 V +/-10 % PXP 3000 3x380/ 400 /415 V+/-10 % Bypass input frequency 50 / 60 Hz + / -8 % Battery voltage 400 VDC Battery operating range 335 - 540 VDC Float voltage at -10 % line power programmable within battery operating range Boost voltage at nominal...

Spcification PXP Battery asymmetry supervision Typical single-line drawing Diode for reverse polarity protection Up to 3 sensors for temperature dependent battery charging voltage (recommended for Valve Regulated Lead Acid (VRLA) battery) Optional features - UPS output Other output voltages: 1x110, 115, 120, 127, 254, 265, 277 V 3x190, 200, 208, 220, 230, 440, 460, 480, 500, 525, 600, 660, 690V_ Without isolation transformer on inverter output " T002 Analog meters 72x72 mm or 96x96 mm (directly beside of HMI): Rectifier mains (voltage, current, frequency) Bypass mains (voltage, current,...

Human-machine interface (front panel) The front panel includes a comprehensive and flexible human-machine interface. It is divided into three sections: Control and display consists of an LC display, i ndication LEDs for operating modes, and push buttons to navigate through the display menus and control the UPS. The user can access measurement data and system information via display menus, including the event and alarm logs. Mimic indicates the current operational status of the system and its components. It clearly shows the power path currently supplying the load and the availability of the...