カタログ >
SCANLAB GmbH >
hurrySCAN® II, hurrySCAN®, SCANgine®

hurrySCAN® II, hurrySCAN®, SCANgine®
1 / 2ページ

カタログの抜粋

hurrySCAN® II, hurrySCAN®, SCANgine® - 1

universal and compatible hurrySCAN ® II, hurrySCAN ®, SCAN gine® These compact scan heads from SCANLAB provide optimal solutions for nearly all challenges found in industrial laser materials processing. The mechanically and electrically intercompatible scan heads have apertures ranging from 7 to 14 mm and various levels of dynamics. High long-term stability and low drift values are ensured via integrated temperature stabilization. A uniform housing concept as well as tight manufacturing and assembly tolerances bring high flexibility and certainty to the design and operation of laser materials processing systems. This also enables speedy adaptation to individual customer requirements. The hurrySCAN ® II scan heads set new high-end performance standards with their optimized combination of dynAXIS ® galvanometer scanners, mirror designs and high-performance electronics. Marking speeds well in excess of 1000 chars/s can be achieved in combination with appropriate lasers. The high quality of SCANLAB’s scan heads is the result of years of experience in the development and manufacture of galvanometer scanners and scan systems. In addition, each scan head must first pass the SCAN check burn-in test before it is released for shipment to the customer. Typical Fields of Application: ð Industry: marking, laser materials processing (e.g. deep engraving, drilling, ablation, cutting, welding), electronics production (e.g. trimming, drilling, structuring), microstructuring, rapid manufacturing, stereolithography, processing-on-the-fly ð Medicine ð Science and research

カタログの1ページ目を開く

hurrySCAN® II, hurrySCAN®, SCANgine® - 2

Product-Dependent Specifications (all angles are in optical degrees) hurrySCAN ® II hurrySCAN ® SCAN gine® Aperture 7 mm 10 mm 14 mm 10 mm 14 mm 10 mm 14 mm Beam Displacement (dimension a) 9.98 mm 12.56 mm 16.42 mm 12.56 mm 15.79 mm 12.56 mm 15.79 mm Step Response Time (settling to 1/1000 of full scale) 1 % of full scale 0.23 ms 0.25 ms 0.40 ms 0.35 ms 0.80 ms 0.80 ms 1.10 ms 10 % of full scale - - 1.60 ms 0.90 ms 2.20 ms 2.00 ms 2.60 ms Typical Speeds (1) Marking speed 3.5 m/s 2.5 m/s 1.5 m/s 2.0 m/s 1.0 m/s 1.0 m/s 0.7 m/s Positioning speed 15.0 m/s 10.0 m/s 7.0 m/s 7.0 m/s 7.0 m/s 7.0...

カタログの2ページ目を開く