PRESSURE RELIEF VALVE
1 / 2ページ

{{requestButtons}}

カタログの抜粋

PRESSURE RELIEF VALVE - 1

SAPAG-0036-ENG-2302 The maximum pressures and temperatures depend on the pressure/temperature ratio, materials, size (DN) and nature of the fluid. Performance PRESSURE RELIEF VALVE Limit maximum pressure in a line by discontinuously and briefly discharging high flow. PROTECTING PIPES FROM PRESSURE SURGES Metal-to-metal sealing between nozzle and blanking plate. Quick opening: 1/40th of a second. Adjustable setpoint via spring acting directly on blanking plate. Moving part low inertia. Sealing for upstream pressure below setpoint. No guidance (no jamming or parasitic drag). Tightness and high-precision (honed radius). Safe actuation. Technical features Type of conveyed liquid: • Conditions of use Contaminated, raw or drinking water. In meshed networks with numerous nodes. Generally where surges/bursts may occur. Vertically fitted valve. As close as possible to the component creating pressure surges. Upstream from a shut-off device (valve) or overspeed valve. Downstream from pumping station pumps. Piping connector diameter at least equal to pressure relief valve diameter. FOLLOW-UP & ADVICE SAPAG VALVES FABRICANT FRANÇAIS DE ROBINET INDUSTRIEL 2 Rue du Marais 80400 Ham, FRANCE +33 (0)3 23 81 43 00 info@sapag-valves.com w w w. s a p a g - v a l v e s . c o m Ce document est la propriété exclusive de SAPAG VALVES, l’usage, la reproduction, la communication à des tiers de ce document doivent faire l’objet d’une autorisation écrite préalable de notre part. Les informations contenues

カタログの1ページ目を開く
PRESSURE RELIEF VALVE - 2

SAPAG-0036-ENG-2302 Parts List Name Upper plate Galvanized steel Blanking plate Stop plate Stain. steel Spring steel Bearing flange Counter flange Stain. steel Ring seal Other optional materials available Valve 125/32 operating instructions according to its set pressure H , m CE ZONE 1 : spring with contiguous turns ** ZONE 4 ** Do not set above maximum sealing pressure. ZONE 3 : Use device with smaller spring wire diameter. ZONE 2 : Valve has exceeded its maximum opening for correct operation. Q , L /s Ce document est la propriété exclusive de SAPAG VALVES, l’usage, la reproduction, la...

カタログの2ページ目を開く

Sapag Valvesのすべてのカタログと技術パンフレット

  1. ISOBOX

    2 ページ

  2. V574 - V575 - V576

    2 ページ

  3. V15

    2 ページ

  4. V10

    2 ページ

  5. V9-V29-V59

    2 ページ

  6. V7

    2 ページ

  7. V3

    2 ページ

  8. DISCOVANNE

    6 ページ

  9. MONOVAR®

    2 ページ

  10. RMI DUBEX

    2 ページ

  11. ELECTRIC ACTUATOR

    2 ページ

  12. JMT

    2 ページ

  13. JMC COUNTERWEIGHT

    2 ページ

  14. JMC

    2 ページ

  15. JHP

    2 ページ

  16. STRAINER

    2 ページ

  17. Butterfly Valve

    24 ページ